YITAHOME FSYD-V1 Small Animal Cage
This document provides assembly instructions for the YITAHOME FSYD-V1 Small Animal Cage (Model PSPPPC-0012). This cage is designed for small animals and features multiple tiers for ample living space.
Assembly Instructions
Before You Begin
- Confirm all parts are present prior to assembly.
- Assemble on a flat, clean, and soft surface.
- Do not fully tighten screws until all parts are assembled.
Note: Instructions are also available in German, French, Italian, and Spanish.
Parts List
| Item No. | Reference Image Description | Quantity |
|---|---|---|
| A | Main Cage Panel (with door) | 1 pc |
| B | Wire Panel | 1 pc |
| C | Top Frame Piece | 1 pc |
| D | Side Frame Piece | 2 pcs |
| E | Wire Shelf | 1 pc |
| F | Wire Shelf | 1 pc |
| G | Base Frame Piece | 1 pc |
| H | Upper Frame Piece | 1 pc |
| I | Bottom Tray/Shelf | 1 pc |
| J | Lower Frame Piece | 2 pcs |
| K | Accessory - Textured Mat/Liner | 1 pc |
| L | Accessory - Fabric Liner | 1 pc |
| M | Caster Wheel | 4 pcs |
| N | Screw (M6x30mm) | 16 pcs |
| O | Screw (M5x25mm) | 4 pcs |
| P | L-Shaped Tool | 1 pc |
Assembly Steps
Step 1: Assemble the Main Cage Structure
Connect the main cage panel (A) with side frame pieces (D) and top frame piece (C). Secure these components using screws (N). The diagram shows panels A, B, C, D being assembled into a rectangular cage structure, with screws (N) indicated at connection points.
Parts Used: A, B, C, D, N (8 pcs)
Visual Aid: The diagram shows the initial assembly of the cage walls and top frame, with screws being inserted.
Step 2: Assemble the Base and Add Casters
Attach the base frame piece (G) and lower frame pieces (J) to the main structure. Install the caster wheels (M) onto the designated points of the base frame. Secure the frame pieces using screws (N).
Parts Used: G, H, I, J, M (4 pcs), N (8 pcs)
Visual Aid: The diagram illustrates the assembly of the lower part of the cage, including the base frame, support beams, and the attachment of four caster wheels (M) to the bottom corners. Screws (N) are shown connecting frame pieces.
Step 3: Install Shelves and Bottom Tray
Insert the wire shelves (E and F) into the cage. Secure the bottom tray (I) and shelves using screws (O). The diagram shows the shelves being placed and then secured from underneath with screws.
Parts Used: E, F, O (4 pcs)
Visual Aid: The diagram shows the wire shelves (E, F) being slid into place and the bottom tray (I) being attached. A close-up shows a screw (O) and washer being used to secure the shelf/tray.
Step 4: Attach Accessories
Attach the textured mat/liner (K) and the fabric liner (L) to the designated areas within the cage. The diagram shows how these accessories are fitted.
Parts Used: K, L
Visual Aid: The diagram shows the textured mat (K) being inserted into a slot and the fabric liner (L) being placed over a shelf or frame. A close-up shows how part K attaches, possibly with clips or slots.
Step 5: Final Check
The cage is now fully assembled. Perform a final check to ensure all parts are securely fastened.
Visual Aid: The diagram shows the fully assembled cage from an isometric view.
Step 6: Installation Completed
The installation is complete. The cage is ready for use.
Visual Aid: The diagram shows the fully assembled cage. Text indicates "Installation Completed" in multiple languages.
Contact Information
If you have any questions about the installation of YITAHOME products, please email us at after-sale.cs@hotmail.com.
Alternative contact method (for amazon.co.uk orders only):
- Log into your Amazon account.
- Go to "Your Orders" and find the purchase.
- Click on "Contact Seller".
Contact information is also available in German, French, Italian, and Spanish.
