YITAHOME Small Animal Cage Assembly Guide
Model: PSPPPC-0013
Assembly Precautions
- Confirm all parts are present prior to assembly.
- Assemble on a flat, clean, and soft surface.
- Do not fully tighten screws until all parts are assembled.
Parts List
| Item No. | Description | Quantity |
|---|---|---|
| A | Main Panel | 1 pc |
| B | Side Connector | 2 pcs |
| C1 | Cage Body Section 1 | 1 pc |
| C2 | Cage Body Section 2 | 1 pc |
| D | Connector Hardware | 4 pcs |
| E | Base Panel | 1 pc |
| F | Top Panel | 1 pc |
| G | Shelf/Platform | 1 pc |
| H | Accessory/Ramp | 1 pc |
| J | Support Bar | 2 pcs |
| K | Connecting Piece | 3 pcs |
| L | Door/Access Panel | 2 pcs |
| M | Connector Hardware | 4 pcs |
| N | Screw Hardware | 24 pcs |
| O | Connector Hardware | 8 pcs |
| P | Base Tray | 1 pc |
| Hardware | M6x30mm Screw | 1 pc |
| Hardware | M5x25mm Screw | 8 pcs |
Assembly Steps
- Step 1: Assemble the first cage body section. Use Part A (1 pc), Part B (1 pc), Part C1 (1 pc), Part D (2 pcs), and Part N (8 pcs).
- Step 2: Assemble the second cage body section. Use Part A (1 pc), Part B (1 pc), Part C2 (1 pc), Part D (2 pcs), and Part N (8 pcs).
- Step 3: Attach internal supports and accessories. Use Part G (1 pc), Part H (1 pc), Part J (2 pcs), Part M (4 pcs), and Part N (8 pcs).
- Step 4: Connect the two cage body sections (C1 and C2) using Part E (1 pc), Part F (1 pc), and Part O (4 pcs).
- Step 5: Install connecting pieces and doors. Use Part K (3 pcs) and Part L (2 pcs).
- Step 6: The cage structure is now assembled. Ensure all connections are secure.
- Step 7: Installation Complete.
Contact Information
For installation questions regarding YITAHOME products, please email after-sale.cs@hotmail.com.
For orders placed on amazon.co.uk, you can contact YITAHOME by logging into your Amazon account, navigating to 'Your Orders', finding the purchase, and clicking 'Contact Seller'.
