YITAHOME Bird Cage
Model: FSYD-V1
Product Name: Bird Cage (VOGELKÄFIG, CAGE À OISEAUX, GABBIA PER UCCELLI, JAULA PARA PÁJAROS)
Assembly Precautions
❗ Confirm all parts are present prior to assembly.
✔️ Assemble on a flat, clean, and soft surface.
❌ Do not fully tighten screws until all parts are assembled.
Parts List
| Part Identifier | Description of Reference Image | Quantity |
|---|---|---|
| A | Screw (M6x30) | 16 pcs |
| B | Connector/Bolt | 4 pcs |
| C | Small Wire Panel | 1 pc |
| D | Large Wire Panel | 1 pc |
| E | Medium Wire Panel | 2 pcs |
| F1 | Lower Tray/Base Panel | 1 pc |
| F2 | Upper Tray/Top Panel | 1 pc |
| G | Wire Panel with Door | 1 pc |
| H | Wire Grid/Shelf | 1 pc |
| I | Slide-out Tray | 1 pc |
| J | Base Support Bar | 1 pc |
| K | Perch | 4 pcs |
| L | Vertical Support Bar | 4 pcs |
| M | Caster Wheel | 4 pcs |
| D (Accessory) | Black Cage Cover | 1 pc |
| E (Accessory) | White Cage Cover | 1 pc |
Assembly Steps
Step 1
Attach four caster wheels (M) to the bottom of the base structure. Connect the lower tray (F1) to the base. Attach the large side panel (D) and the upper tray (F2) to the base structure. Use screws (A) and connectors (B) for assembly. Install a wire shelf (H). The diagram shows the base frame with wheels attached, the lower tray, one large side panel, the upper tray, a shelf, and indicates where screws (A) and connectors (B) are used.
Step 2
Attach the small wire panel (C), medium wire panels (E), and the wire panel with door (G) to the main structure. Use screws (A) for attachment. The diagram shows the partially assembled cage from Step 1, with additional side panels (C, E, G) being attached using screws (A).
Step 3
Attach the upper section (containing panel G) to the lower assembled section. Use screws (A) and connectors (B) to join the two main parts of the cage. The diagram shows the lower cage assembly and the upper cage section being lowered and connected using screws (A) and connectors (B).
Step 4
Install the slide-out tray (I) at the bottom. Attach the base support bar (J). Insert perches (K) and vertical support bars (L) into the cage. The diagram shows the fully assembled cage frame, indicating the placement of the slide-out tray (I), support bar (J), perches (K), and vertical bars (L).
Step 5
Place the black cover (D) or the white cover (E) over the assembled bird cage. The diagram shows the assembled cage with arrows pointing to two separate images: one with a black cover (D) and one with a white cover (E).
Step 6
Installation is complete. The bird cage is now assembled.
Contact Information
For any questions regarding the installation of YITAHOME products, please email after-sale.cs@hotmail.com.
An alternative method to contact YITAHOME for Amazon.co.uk orders is to log into your Amazon account, go to "Your Orders", find the purchase, and click "Contact Seller".
