YITAHOME FSYD-V1 Bird Cage Installation Guide
Model Number: PSPPPC-0022
Product Type: Bird Cage
Before You Begin Assembly
Please review the following important instructions before starting the assembly process:
- 1. Confirm all parts are present and accounted for prior to assembly.
- 2. Assemble the bird cage on a flat, clean, and soft surface to prevent damage.
- 3. Do not fully tighten screws until all parts of the bird cage have been assembled.
(These instructions are also provided in German, French, Italian, and Spanish.)
Parts List
| Item No. | Description | Quantity |
|---|---|---|
| 1 | Large Wire Panel (Side/Back) | X1 |
| 2 | Large Wire Panel (Side/Back) | X1 |
| 3 | Medium Wire Panel (Side) | X2 |
| 4 | Small Wire Panel (Top) | X1 |
| 5 | Base Tray | X1 |
| 6 | Tray Panel | X1 |
| 7 | Base Frame | X2 |
| 8 | Bottom Grate | X1 |
| 9 | Vertical Frame | X2 |
| 10 | Horizontal Frame | X2 |
| 11 | Door Wire Panel | X2 |
| 12 | Caster (Wheel) | X4 |
| 13 | Support Bar | X4 |
| A | Screw (M6x30) | X16 |
| B | Allen Wrench | X4 |
| C | Allen Wrench | X1 |
| D | Grey Protective Cover | X1 |
| E | White Protective Cover | X1 |
Assembly Steps
Step 1: Assemble Base Frame
Attach the two Base Frames (7) to the bottom of Wire Panel (1) and Wire Panel (2) using four Screws (A). The diagram shows Wire Panels 1 and 2 standing upright, with Base Frames being secured at their lower corners using screws.
Parts used: 1 (x1), 2 (x1), 7 (x2), A (x4).
Step 2: Attach Side Panels
Attach the two Medium Wire Panels (3) to the sides of the structure assembled in Step 1, using four Screws (A). Arrows indicate the points of attachment.
Parts used: 3 (x2), A (x4).
Step 3: Attach Top Panel
Secure the Small Wire Panel (4) to the top of the structure using four Screws (A). Screws are indicated at the top corners.
Parts used: 4 (x1), A (x4).
Step 4: Assemble Lower Frame
Construct the lower frame using two Vertical Frames (9) and two Horizontal Frames (10). Attach the Bottom Grate (8) to the frame. Four Casters (12) are then attached to the bottom of the Vertical Frames (9). Eight Screws (A) are used in this step.
Parts used: 8 (x1), 9 (x2), 10 (x2), 12 (x4), A (x8).
Step 5: Attach Base Tray and Door Panels
Connect the Base Tray (5) and Tray Panel (6) to the lower frame assembly. Attach the two Door Wire Panels (11) to the main cage structure using four Support Bars (13) and four Screws (B). The diagram shows the lower frame being integrated with the upper cage, and door panels being fitted.
Parts used: 5 (x1), 6 (x1), 11 (x2), 13 (x4), B (x4).
Step 6: Apply Covers
Place either the Grey Protective Cover (D) or the White Protective Cover (E) over the assembled bird cage. Diagrams illustrate the covers being fitted onto the cage.
Parts used: D (x1) or E (x1).
Step 7: Installation Complete
The bird cage assembly is now complete. The text 'Installation Completed' is displayed in multiple languages.
Contact Information
If you have any questions regarding the installation of YITAHOME products, please send an email to after-sale.cs@hotmail.com.
An alternative method to contact YITAHOME for Amazon.co.uk orders is as follows:
- Log into your Amazon account.
- Navigate to 'Your Orders' and locate the specific purchase.
- Click on the 'Contact Seller' option.
(Contact information is also available in German, French, Italian, and Spanish.)
