YITAHOME FSYD-V1 Bird Cage
Model: PSPPPC-0014
General Assembly Instructions
Before starting assembly, please follow these important guidelines:
- Confirm all parts are present prior to assembly.
- Assemble on a flat, clean, and soft surface.
- Do not fully tighten screws until all parts are assembled.
(Note: Instructions are also provided in German, French, Italian, and Spanish in the original document.)
Parts List
Identify all components before beginning assembly.
| Item No. | Reference Image Description | Quantity |
|---|---|---|
| A | Base frame components (appears to be 2 pieces) | X1 set |
| B | Side panels (appears to be 2 pieces) | X1 set |
| C | Front/Back panels (appears to be 2 pieces) | X1 set |
| D | Roof panels (appears to be 2 pieces) | X1 set |
| E | Pull-out bottom tray | X1 |
| F | Roof decorative/support pieces | X1 |
| G | Main roof panels (appears to be 2 pieces) | X1 set |
| H | Upper roof panels (appears to be 2 pieces) | X1 set |
| I | Hanging perch/toy holder | X1 |
| J | Food/water dishes | X4 |
| K | Cage door latches/clips | X2 sets |
| L | Perch rods | X3 |
| M | Base frame supports (U-shaped) | X2 |
| N | Base frame supports (U-shaped) | X2 |
| O | Wire bottom grate | X1 |
| P | Caster wheels | X4 |
| Q | Screws (M6x35mm) | X8 |
Assembly Steps
Step 1: Assemble Base Frame
Connect parts A and B to form the main cage structure. Use the provided clips or connectors as shown in the diagram.
Diagram shows two side panels (B) being attached to base frame components (A).
Step 2: Attach Front and Back Panels
Attach parts C (front and back panels) to the assembled base structure. Ensure the door opening is correctly oriented.
Diagram shows front/back panels (C) being attached to the structure formed in Step 1.
Step 3: Install Bottom Tray and Roof Supports
Insert the bottom tray (E) into the base. Attach roof support pieces (F) to the top of the cage structure.
Diagram shows the bottom tray (E) being slid into the base and roof support pieces (F) being attached to the top frame. Also shows detailed views of attachment mechanisms.
Step 4: Attach Roof Panels
Attach the roof panels (G and H) to the top of the cage. Ensure they are securely fastened.
Diagram shows roof panels (G and H) being mounted onto the top of the cage structure, with detailed views of the attachment points.
Step 5: Install Interior Accessories
Hang the perch/toy holder (I). Insert perch rods (L) into the designated slots. Place food/water dishes (J) in their holders.
Diagram shows the interior of the cage with parts I, L, and J being installed. Detailed views show how perches (L) and dishes (J) are secured.
Step 6: Assemble Base Frame Supports
Assemble the base frame supports using parts M, N, and screws Q. Two sets of M/N supports are assembled.
Diagram shows four U-shaped frame pieces (M and N) being connected using screws (Q) to form two separate base support structures.
Step 7: Attach Bottom Grate and Caster Wheels
Place the wire bottom grate (O) into the cage base. Attach the caster wheels (P) to the bottom of the assembled base frame supports.
Diagram shows the wire grate (O) being placed inside the cage and the caster wheels (P) being screwed onto the bottom of the base frame supports.
Step 8: Final Assembly
Place the assembled cage body onto the base frame with wheels. Ensure all connections are secure. The installation is now complete.
Diagram shows the main cage structure being lowered onto the wheeled base. Text indicates "Installation Completed" in multiple languages.
Contact Information
If you have any questions about the installation of YITAHOME products, please contact us:
Email: after-sale.cs@hotmail.com
Alternative Contact (Amazon.co.uk orders only):
- Log into your Amazon account.
- Go to "Your Orders" and find the purchase.
- Click on "Contact Seller".
(Contact information is also provided in German, French, Italian, and Spanish in the original document.)
