YITAHOME FSYD-V1 Bird Cage
Model: PSPPPC-0023
Also known as: Vogelkäfig, Cage à Oiseaux, Gabbia per Uccelli, Jaula para Pájaros
Assembly Precautions
- Confirm all parts are present prior to assembly.
- Assemble on a flat, clean, and soft surface.
- Do not fully tighten screws until all parts are assembled.
Parts List
| Item No. | Reference Image Description | Quantity |
|---|---|---|
| A | Large Wire Panel (used for sides/back/top) | X1 |
| B | Medium Wire Panel (Door) | X1 |
| C | Side Wire Panel | X1 |
| D | Back Wire Panel | X1 |
| E | Side Wire Panel (with door access) | X2 |
| F1 | Base Tray | X1 |
| F2 | Top Panel | X1 |
| G | Large Wire Panel (used for sides/back/top) | X1 |
| H | Bottom Panel | X1 |
| I | Slide-out Tray | X1 |
| J | Base Frame Connector | X1 |
| K | Perch | X4 |
| L | Support Rod | X4 |
| M | Caster Wheel | X4 |
| Hardware A | M6x30 Screw | X16 |
| Hardware B | Clip/Connector | X4 |
| Hardware C | Assembly Tool | X1 |
| Hardware D | Accessory Bag 1 | X1 |
| Hardware E | Accessory Bag 2 | X1 |
Assembly Instructions
Step 1: Assemble the Base Structure
Attach four caster wheels (M) to the bottom of the frame. Connect the bottom panel (H) and the base tray (F1) using screws (A). Attach side panels (C, G), back panel (D), and front panel (E) to the base. Attach upper side panels (A) and top panel (F2).
Parts used in this step: M (x4), H (x1), F1 (x1), A (x8), C (x1), G (x1), D (x1), E (x1), A (x1), F2 (x1).
Diagram Description: The diagram shows a base frame with four wheels (M) attached. Panels labeled A, C, D, E, F1, F2, G, H are being connected using screws (A). The diagram indicates the use of 8 screws (A) for the base assembly and 1 screw (A) for the top panel connection.
Step 2: Connect Side and Large Panels
Connect side panel (C) and front panel (E) to the base assembly. Attach large panel (G) to the side. Secure with screws (A).
Parts used in this step: C (x1), E (x1), G (x1), A (x4).
Diagram Description: The diagram shows the partially assembled cage from Step 1. Panels C, E, and G are being attached to the existing structure using screws (A).
Step 3: Attach the Upper Cage Section
Place the assembled upper cage section onto the lower cage section. Secure the two sections together using screws (A) and clips (B).
Parts used in this step: A (x4), B (x4).
Diagram Description: The diagram shows the lower part of the cage and the upper part of the cage being joined. Screws (A) and clips (B) are used to connect them.
Step 4: Install Perches and Tray
Insert perches (K) into the designated slots on the cage walls. Attach support rods (L) to reinforce the structure. Slide the tray (I) into the base and attach the base frame connector (J).
Parts used in this step: K (x4), L (x4), I (x1), J (x1).
Diagram Description: The diagram shows the assembled cage. Perches (K) are inserted into the cage. Support rods (L) are attached. The slide-out tray (I) is shown being inserted, along with the base frame connector (J).
Step 5: Attach the Cover
Place the protective cover over the assembled cage. Two cover options are provided: a black cover (D) and a white cover (E).
Parts used in this step: D (x1) or E (x1).
Diagram Description: The diagram shows the assembled cage. A black cover (D) is shown being placed over it, and a white cover (E) is shown being placed over it separately.
Step 6: Installation Completed
The installation of your YITAHOME Bird Cage is now complete.
Diagram Description: The diagram shows the fully assembled bird cage.
Contact Information
If you have any questions about the installation of YITAHOME products, please email us at after-sale.cs@hotmail.com.
Alternative method to contact us (Amazon.co.uk orders only):
- Log into your Amazon account.
- Go to "Your Orders" and find the purchase.
- Click on "Contact Seller".
