INSTALLATION
CAUTION: Parts are placed at the bottom of the product.
Assembly Instruction
Your accent chair comes packaged in one box. Carefully remove all components from the packaging and set aside for assembly.
CAUTION: DO NOT use any sharp objects to open plastic wrapped components as damage to product or components may result.
Package Contents
| Item | Description |
|---|---|
| A*1 | Seat Cushion |
| B*1 | Seat Base |
| C*1 | Backrest |
| D*1 | Side Panel / Armrest Frame |
| E*2 | Leg Frames |
| F*1 | Bolt (M8*60) |
| G*8 | Screws (M8*70) |
| H*2 | Washers |
| I*4 | Screws (M6*35) |
| J*1 | Allen Wrench ? |
| K*2 | Long Bolts |
| L*1 | Pillow |
| M*4 | Short Screws |
| N*2 | Leg Caps / Feet |
Assembly Steps
Step 1:
Place the frame (A) into the foam cushion (B). Align the screw holes. Ensure the front of the components are oriented correctly. Tips: Hole to hole alignment is important.
Step 2:
Align the backrest (C) with the seat base. Ensure the front is oriented correctly. Arrows indicate alignment points.
Step 3:
Attach the side panel/armrest frame (D) to the seat base. Use bolts (M8*70) (G) and washers (H). Do not tighten fully yet (approx. 70% tight). Use Allen wrench (J).
Step 4:
Attach the leg frames (E) to the underside of the seat base. Use screws (M) (I) and Allen wrench (J). Ensure screw holes are on the inside.
Step 5:
Attach the leg frames (E) to the side panels/armrest frames (D). Use screws (M) (I) and Allen wrench (J). Ensure screw holes are on the inside. Revolve the structure as needed for access. ↩️
Step 6:
Screw Tighten: Fully tighten all bolts and screws from previous steps. Use Allen wrench (J) to tighten bolts (K) and screws (G) with washers (H) to 100%.
ATTENTION!! Bolts may loosen during normal everyday use. They should be periodically inspected and re-tightened to prevent damage or injury. Always check to ensure that all hardware is kept tightened.
Warnings
- Please check if all components are included and can be used normally.
- Assemble all components correctly before connecting the chair to power (if applicable).
- DO NOT sit on the armrests or footrest to eliminate the risk of tipping over. [Tip-over risk symbol]
- If the chair is damaged or doesn't match the website description, please send clear pictures of the product and carton label to the service team for assistance.
- If the accent chair doesn't work, try these self-checking measures first:
- a) Check if all cables are connected.
- b) Check if the transformer light is on.
- If you have any questions about the product, please contact customer service.
Safety Visuals:
- [Moving chair symbol]: Moving the chair carefully to prevent your feet from being hurt. ?♂️➡️?
- [Carpet symbol]: Put a carpet under the chair to protect your floor while assembling. ?
- [Question mark symbol]: If unsure about assembly or troubleshooting, consult customer service. ❓➡️??
