Zero-Gravity Rocking Chair Assembly Instructions
Product Overview
✅ EASY ASSEMBLY
Assemble in 20 minutes or less.
This document provides detailed instructions for assembling your Zero-Gravity Rocking Chair.
Diagram Description: A line drawing depicts the fully assembled Zero-Gravity Rocking Chair. It features a curved, ergonomic design, appearing to be constructed from wicker or rattan, complete with a cushioned seat and a footrest.
Accessories List
| Part | Description | Quantity |
|---|---|---|
| A | Seat Section Component | 2 |
| B | Seat Section Component | 2 |
| C | Curved Support Rod | 2 |
| D | Straight Support Rod | 1 |
| E | Curved Support Arm | 1 |
| F | Curved Support Arm | 2 |
| G | U-shaped Support | 2 |
| H | Horizontal Support Bar | 1 |
| I | Footrest Surface | 1 |
| J | Footrest Frame | 1 |
| K | Base Frame | 1 |
| L | Cushioned Seat Pad | 1 |
Tool Kit
| Part | Description | Quantity |
|---|---|---|
| Q | Allen Wrench (M6) | 1 |
| R | Socket Wrench (M6) | 1 |
| S | Open-end Wrench (M6) | 1 |
| T | Allen Wrench (M6) | 1 |
| Screws | M6,55mm | 12 |
| Screws | M6,40mm | 16 |
| Screws | M6,16mm | 6 |
| Screws | M6,30mm | 2 |
Step 1: Assembling the Seat Section
Connect parts A (x2) and B (x2) to form the main seat section. Use 8 screws of type M6,55mm.
Notice: 1-Please do not tighten all screws completely at the beginning! 2-Fully tighten after completing the seat frame!
Diagram Description: Shows four curved components (labeled A and B) being joined together to form the rounded seat structure. A magnified view illustrates how screws and nuts are used to secure the frame pieces.
Step 2: Securing Part (G) to the Seat Frame
Attach the U-shaped supports (G) to the assembled seat frame. Use 4 screws of type M6,40mm.
Notice: 1-Please do not tighten all screws completely at the beginning! 2-Fully tighten after completing the chair!
Diagram Description: Depicts two U-shaped metal supports (G) being attached to the lower part of the seat frame. A close-up shows the screw and nut connection points.
Step 3: Connecting Parts (G) & (F) with Part (C)
Connect the curved support rods (C) to the U-shaped supports (G) and the curved support arms (F). An inset diagram shows the connection of G and F to C.
Notice: 1-Please do not tighten all screws completely at the beginning! 2-Fully tighten after completing the chair!
Diagram Description: Illustrates how two curved rods (C) are attached to the top ends of the U-shaped supports (G) and also connect to the curved support arms (F). The diagram shows the assembly progressing towards the chair's base and sides.
Step 4: Securing Part (F) to the Seat Frame
Secure the curved support arms (F) to the seat frame. Use 4 screws of type M6,40mm.
Notice: 1-Please do not tighten all screws completely at the beginning! 2-Fully tighten after completing the chair!
Diagram Description: Shows the curved support arms (F) being attached to the main seat structure, connecting to points where parts C and G are also attached. A close-up highlights the screw connections.
Step 5: Connecting Part (D) & (F)
Connect the straight support rod (D) to the curved support arms (F). Use 4 screws of type M6,40mm.
Diagram Description: Illustrates the straight support rod (D) being attached between the two curved support arms (F) at the lower rear of the chair. A close-up shows the screw connections.
Step 6: Connecting Part (E) & (C)
Connect the curved support arm (E) to the curved support rods (C). Use 4 screws of type M6,16mm.
Diagram Description: Shows the single curved support arm (E) being attached to the upper curved rods (C) at the front of the chair. A close-up highlights the screw connections.
Step 7: Connecting Part (H) and (G)
Connect the horizontal support bar (H) to the U-shaped supports (G). Use 4 screws of type M6,40mm.
Diagram Description: Depicts the horizontal support bar (H) being attached between the two U-shaped supports (G) at the base of the chair. A close-up shows the screw connections. An additional visual indicates an "Incorrect Installation Case" where the parts are crossed out, suggesting a specific orientation or placement is crucial.
Step 8: Securing Part (K) to Part (H) and (E)
Attach the base frame (K) to the horizontal support bar (H) and the curved support arm (E). Use 4 screws of type M6,55mm.
Diagram Description: Shows the rectangular base frame (K) being attached to the chair's structure, connecting to the horizontal bar (H) and the front support arm (E). A close-up shows the screw connections.
Step 9: Installing the Footrest
Assemble the footrest by connecting the footrest surface (I) and the footrest frame (J). Use 2 screws of type M6,30mm.
Diagram Description: Illustrates the footrest surface (I) being attached to its supporting frame (J). A close-up shows the screw connection.
Step 10: Positioning the Footrest
Slide the assembled footrest (combination of parts I & J) into the track of the base frame (K).
Diagram Description: Shows the assembled footrest unit being inserted into the designated track on the base frame (K) of the chair. Arrows indicate the direction of movement.
Step 11: Securing the Footrest Trajectory
Secure the footrest's movement track. Use 2 screws of type M6,16mm.
Diagram Description: A close-up view shows screws being used to fasten the footrest mechanism to the chair's base, ensuring its smooth sliding motion.
Online Support
Please read the installation guide carefully before installation.
If you have any questions during the installation process, please contact Corrigan Studio for detailed guidance.
Diagram Description: An icon represents online support, featuring a person wearing headphones in front of a computer screen.
