Chair
Image of a chair with a metal frame and slatted seat/back.
Parts List
| Label | Description | QTY |
|---|---|---|
| A | Chair Seat and Back | 1 |
| B | Chair Leg Frame | 1 |
Hardware
| Label | Description | QTY |
|---|---|---|
| ① | Bolt (M6x35mm) | 5 |
| ② | Washer | 5 |
| ③ | Allen Key | 1 |
Assembly Preparation
Before Beginning Assembly:
- ? Read instructions, cover to cover.
- ??? Have 2 adults on hand for assembly.
- ? Do not assemble on flooring or carpet.
- ? Assemble on a clean non-marring surface (packing foam).
- ✅ Save all packaging until finished.
Assembly Steps
Overview:
Diagram showing the assembled chair with labels 'Chair Leg Frame(B)' and 'Chair Seat and Back(A)'. An arrow indicates 'Front Facing'.
This chair has multiple parts and may require up to 20 minutes to assemble. The overview picture is provided to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1
Diagram shows part A (seat/back) and part B (leg frame) separately.
Unpack and place all parts on a clean, non-marring surface.
Step 2
Diagram shows part A on the ground and part B being aligned to it, with dotted lines indicating connection points.
Place the Chair Seat and Back (A) on a clean, non-marring surface. Align the Chair Leg Frame (B) to Chair Seat and Back (A).
Step 3
Diagram shows the chair frame being assembled. Bolts and washers are shown being inserted into connection points, with an Allen key indicated for tightening.
Attach Chair Leg (B) to Chair Seat and Back (A) with Bolts (①) and Washers (②) using the Allen Key (③). Do not fully tighten the Bolts.
Step 4
Diagram shows the fully assembled chair from the side.
Turn the chair right side up. Place the chair on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently and carefully, sit into the chair. This will help align all the parts at all the joint areas. Then get off the chair, and in a sequential manner, proceed to tighten all screws. To tighten the screws at the base of the backrest, secure assistance from your adult partner(s). You may be required to turn the chair to gain easy access to the secure points. Turn the chair in a synchronized manner.
CAUTION 1:
When tightening the screws, tighten sequentially. DO NOT tighten any screw fully and then move on to the next one, as this could cause the frame to warp. If the chair wobbles after tightening all screws, loosen the screws and repeat the same process.WARNING!!
IF THE CHAIR IS NOT STABLE, IT COULD CAUSE THE PRODUCT TO BECOME DAMAGED.Ensure all screws are fully locked into position. The chair is ready to be used.
Caution 2:
This chair should only be used on a flat, level surface.Care & Maintenance
- ♨️ Do not put hot items directly on furniture surface.
- ?❌ Do not clean furniture with harsh cleansers or polish.
- ☀️ To obtain the longest lifespan of your outdoor products, minimizing exposure to direct sunlight is recommended.
- ?❌ Children should not climb or jump on the furniture.
- ✍️❌ Do not write on furniture without a padded barrier to protect the surface.
- ☁️?️☀️ To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine. Whenever possible, cover the product and/or place under patio or awnings.
- ?❌ Not for commercial use. For residential use only.
- ?? Stains may be removed with mild soap solution and damp cloth.
- ?? Dust and pick-up spills using a clean, non-colored, lint-free cloth.
