Assembly Instructions
Caution: You must read this before you proceed.
Sets often ship in multiple boxes and may arrive a day or two apart.
General Guidelines
IMPORTANT:
- Read the instructions carefully from cover to cover.
- Do not assemble on flooring or carpet.
- Assemble on a clean non-marring surface (e.g., packing foam).
- Save all packaging until finished.
- Do not tighten bolts/screws completely until all bolts/screws are lined up and inserted into holes.
- Do not over-tighten screws and bolts to avoid stripping.
- Please always use hand tools to assemble this product and never use power tools.
Coffee Table (S)
SKU: W3137P270375
This product is combined with the Coffee Table(L) as a set.
[Image: A line drawing of a round coffee table with a slatted side and four legs.]
Parts List
[Image: Main cabinet body]
| Label | Description | QTY |
|---|---|---|
| 1 | Major Cabinet | 1 |
| 2 | Leg | 4 |
Assembly Steps
Step 1
Attach the four Legs (2) to the underside of the Major Cabinet (1). Screw them in until fully tightened (approximately 100% tight).
[Diagram shows four legs being screwed into the base of the main cabinet, with circular arrows indicating rotation and a '100%' indicator.]
Step 2
Flip the assembled side table 180° carefully.
[Diagram shows the table being flipped over using a curved arrow.]
Step 3
Place the table upright. Note: The legs can be adjusted with the built-in adjustable leveler at the bottom of each leg to ensure stability on uneven surfaces.
[Diagram shows the table upright with a close-up of a leg showing an adjustable leveler.]
Coffee Table (L)
SKU: W3137P270377
This product is combined with the Coffee Table(S) as a set.
Handle the glass tabletop carefully during installation to avoid damage.
[Image: A line drawing of a round coffee table with a glass top, a top frame, a bottom frame, and three legs.]
Parts List
[Image: Round glass top]
| Label | Description | QTY |
|---|---|---|
| 1 | Top glass | 1 |
| 2 | Top frame | 1 |
| 3 | Leg | 3 |
| 4 | Bottom frame | 1 |
Hardware List
[Image: Bolt (1/4" x 2")]
| Label | Description | QTY |
|---|---|---|
| A | Bolt (1/4" x 2") | 3 |
| B | Spring Washer | 3 |
| C | Flat Washer | 3 |
| D | Allen Wrench | 1 |
Assembly Steps
Step 1
Attach the three Legs (3) to the Top frame (2). Screw them in until fully tightened (approximately 100% tight).
[Diagram shows three legs being attached to the circular top frame, with circular arrows indicating rotation and a '100%' indicator.]
Step 2
Attach the Bottom frame (4) to the Legs (3) using three Bolts (A), three Spring Washers (B), and three Flat Washers (C). Use the Allen Wrench (D) to tighten.
[Diagram shows the bottom frame being connected to the legs using the provided hardware. A magnified view shows the bolt, washers, and Allen wrench.]
Step 3
Flip the assembled side table 180° carefully.
[Diagram shows the assembled base structure being flipped over using a curved arrow.]
Step 4
Place the Top glass (1) onto the Top frame. Note: Hold the glass tabletop with your hand across the round top frame while placing it to ensure it is seated correctly.
[Diagram shows the glass top being placed onto the table frame with a downward arrow indicating placement.]
Step 5
Place the table upright. Note: The legs can be adjusted with the built-in adjustable leveler at the bottom of each leg to ensure stability on uneven surfaces.
[Diagram shows the table upright with a close-up of a leg showing an adjustable leveler.]
Care & Maintenance
Your Item is ready for use. This Item should only be used on a flat, level surface.
- Furniture may scratch the floor. We recommend using furniture pads to protect your floors.
- Do not put hot items directly on furniture surface.
- Do not clean furniture with harsh cleansers or polishers.
- Do not place furniture under direct sunlight.
- Do not place furniture near heating or cooling vents.
- Do not expose the product to high temperatures or humid environments.
- Do not write on furniture without a padded barrier to protect the surface.
- For indoor use only.
- Stains may be removed with mild soap solution and damp cloth.
- Children should not climb or jump on the furniture.
- Dust and clean up spills using a clean, non-colored, lint-free cloth.
- Regularly check screws to ensure stability.
- For Coffee Table (L): Do not place heavy objects on the glass surface.
- For Coffee Table (L): Avoid scratching the glass surface with sharp objects.
