Double Rocking Chair
EASY ASSEMBLY
Assemble in 25 minutes or less.
Accessories List
| Part | Description | Quantity |
|---|---|---|
| A | Seat/Back Frame Component | 1 |
| B | Seat/Back Frame Component | 1 |
| C | Seat/Back Frame Component | 1 |
| D | Seat/Back Frame Component | 1 |
| E | Seat/Back Frame Component | 2 |
| F | Back Leg - Long | 2 |
| G | Front Leg - Short | 2 |
| H | Curved Support Arm | 2 |
| I | Horizontal Support Bar | 2 |
| J | Cushion | 1 |
Notice: Please check the accessories before installation. If there is any problem, feel free to contact Corrigan Studio.
Tool Kit
| Tool/Hardware | Description | Quantity |
|---|---|---|
| K | Screw M6.55mm | 18 |
| L | Screw M6.40mm | 16 |
| M | Screw M8.50mm | 4 |
| N | Wrench | 1 |
| O | Allen Wrench (M-6, M-8) | 1 |
| P | Small Tool | 1 |
| Q | Wrench M-6 | 1 |
Assembly Instructions
General Notice: Before installing, be sure to place the bases in alphabetical order. Please do not tighten all screws completely at the beginning. Fully tighten after completing the respective frame/chair section.
Step 1-1: Assembling the Seat Part of the Chair
Using screw (K) -- M6.55mm.
Connect seat/back frame components (A), (C), (D), and (E) together. A close-up view shows a screw (K) passing through aligned holes in two components, secured by a nut.
Step 1-2: Assembling the Seat Part of the Chair
Using screw (K) -- M6.55mm.
Continue assembling the seat/back frame components (A), (B), (C), (D), and (E) into a curved shape. A close-up view shows a screw (K) passing through aligned holes, secured by a nut.
Step 2: Securing Legs to the Seat Frame
Using Screw (L) - M6.40mm.
F: Back Legs - Long
G: Front Legs - Short
Attach the long back legs (F) and short front legs (G) to the assembled seat frame (A, B, C, D, E) using screws (L). A close-up view shows a screw (L) connecting a leg to the frame, secured by a nut.
Notice: Fully tighten after completing the chair legs!
Step 3: Securing Support Arms
Using screw (M) - M8.50mm.
Attach the curved support arms (H) to the top of the chair legs. A close-up view shows a screw (M) passing through the arm (H) and into the leg assembly, secured by a nut.
Notice: Fully tighten after completing the chair!
Step 4: Securing Horizontal Bars
Using Screw (L) - M6.40mm.
Attach the horizontal support bars (I) between the curved support arms (H) on both sides of the chair. A close-up view shows a screw (L) connecting the bar (I) to the arm (H), secured by a nut.
Notice: Fully tighten after completing the chair!
Step 5: Final Tightening and Cushion Placement
Tighten all screws and place the cushion on the chair.
Description of final product: The completed Double Rocking Chair, showing the assembled frame with the cushion placed on top.
Online Support
Please read the installation guide carefully before installation. If you have any questions during the installation process, please contact Corrigan Studio for detailed guidance.
