Introduction
Your accent chair comes packaged in one box. Carefully remove all components from the packaging and set aside for assembly.
⚠️ CAUTION: ❌ DO NOT use any sharp objects to open plastic wrapped components as damage to product or components may result.
Package Contents & Parts List
PARTS LIST
| LABEL | PICTURE DESCRIPTION | DESCRIPTION | QTY |
|---|---|---|---|
| A | [Drawing of chair back frame] | Back Frame | 1PC |
| B | [Drawing of rectangular cushion] | Back Cushion | 1PC |
| C | [Drawing of seat base frame] | Seat Frame | 1PC |
| D | [Drawing of square cushion] | Seat Cushion | 1PC |
| E | [Drawing of chair legs and armrest structure] | Legs & Arms | 2PCS |
| F | [Drawing of a short bar] | Spacer | 1PC |
HARDWARE
| LABEL | PICTURE DESCRIPTION | DESCRIPTION | QTY |
|---|---|---|---|
| G | [Drawing of small circular pads] | foot pads | 4PCS |
| H | [Drawing of hex-head screw] | Screw | 12PCS+1PC |
| I | [Drawing of L-shaped wrench] | Wrench | 1PC |
Assembly Steps
STEP 1
Diagrams illustrate the assembly of the chair frame. In Step 1, the Back Frame (A) is attached to the Seat Frame (C), and the Legs & Arms (E) are connected to the frame using six Screws (H) and the Wrench (I). A Spacer (F) is also fitted. Screws are partially tightened to 60%.
Detailed view shows the Wrench (I) turning Screws (H) to 60% tightness.
Parts used in this step: 6 x Screws (H), 1 x Wrench (I).
STEP 2
Step 2 shows further attachment of the Legs & Arms (E) to the main frame using six Screws (H) and the Wrench (I), also tightened to 60%.
Detailed view shows the Wrench (I) turning Screws (H) to 60% tightness.
Parts used in this step: 6 x Screws (H), 1 x Wrench (I).
STEP 3
Attach the four Foot Pads (G) to the bottom of the Legs & Arms (E). The diagram shows the chair placed on a protective surface. All previously installed screws are now tightened to 100% using the Wrench (I).
Detailed view shows the Wrench (I) tightening screws to 100% tightness.
Parts used in this step: 4 x Foot Pads (G).
STEP 4
Place the Seat Cushion (D) onto the Seat Frame (C).
Arrows indicate the Seat Cushion (D) being placed downwards onto the Seat Frame (C).
STEP 5
Place the Back Cushion (B) onto the Back Frame (A).
The Back Cushion (B) is shown being placed onto the Back Frame (A).
❗ ATTENTION!!
Bolts may loosen during normal everyday use. They should be periodically inspected and re-tightened to prevent damage or injury. Always check to ensure that all hardware is kept tightened.
Warnings & Safety Information
- Please check if the components of the chair are all included and can be used normally.
- Assemble all components according to the instruction correctly before you connect the chair to the power.
- Please ❌ DO NOT sit on the armrests or footrest to eliminate the risk of tipping over.
- If the chair is damaged or doesn't match the website description, please send clear pictures of the product and label of the carton to the service team for further help.
- If the chair doesn't work, you may try the following measures for self-checking firstly:
- a) Check if all the cables are connected;
- b) Check if the light of the transformer is on.
- If you have any questions about the product, please contact customer service.
