ZEALOT-S97 Wireless Speaker
Quick Start Guide
Product Overview & Warnings
To ensure correct use and trouble-free operation, please read this user manual carefully first. For the first use, it is recommended to fully charge it. Please use and store the product at room temperature. Do not expose the product to fire, high temperature, direct sunlight, etc.
Please keep the speaker volume moderate to avoid temporary or permanent hearing impairment. Do not use organic solvents or other chemicals to clean the product. Do not let small particles enter the product. Do not disassemble the product or make any modifications to the product structure or any part thereof. If the battery is not replaced correctly, there will be an explosion accident; only the same battery type can be replaced. The battery (battery pack) must not be exposed to such sunlight, fire, or similar overheating conditions. Do not throw and drop the product to avoid damage.
The ZEALOT-S97 is a portable wireless speaker designed for high-quality audio playback.
Packing Content
- ZEALOT-S97 Wireless Speaker
- USB-C Charging Cable
- User Manual
Getting Started
Power On/Off
Press the [Power Button] to turn the speaker on or off. The battery indicator light shows the battery status:
- 80%-100%: Green light is on
- 40%-70%: Yellow light is on
- < 30%: Red light is on
Wireless Connection
To connect your device via Bluetooth:
- Turn on the wireless function on your phone or device.
- Search for "ZEALOT-S97" in the available Bluetooth devices list and connect.
Mode Switch
Press the mode button to cycle through available input modes: Wireless [Bluetooth Icon], USB [USB Icon], TF Card [TF Card Icon], AUX [AUX Icon].
Play Controls
Use the playback buttons to control your music: Play/Pause [Play Icon], Volume Up [Volume Up Icon], Volume Down [Volume Down Icon].
Party Add (TWS Pairing)
To pair two ZEALOT-S97 speakers for stereo sound:
- Turn on both speakers and ensure they are within 1 meter of each other.
- On both speakers, press and hold the [Power Button] for a prompt tone, indicating successful pairing. A second prompt tone confirms successful TWS connection.
- On your phone, ensure Bluetooth is on and connect to 'ZEALOT-S97'.
- Play music to test if both speakers are playing together.
Light Control
Long press the [Light Icon] button to turn the RGB colorful light on or off.
Equalizer Modes
Cycle through equalizer modes by pressing the EQ button:
- Bass [Bass Icon] (Green light is on)
- Vocal [Vocal Icon] (Orange light is on)
- Normal [Normal Icon]
Charging
Connect the USB-C cable to the speaker's charging port [USB Icon] and a power source to charge the device.
Technical Specifications
| Feature | Value |
|---|---|
| Wireless version | 5.2 |
| Charging voltage | DC5V 2A |
| Working voltage | 7.4V |
| Transmission distance | 10m |
| Frequency range | 20Hz-20KHz |
| Speaker | 76mm*2+38mm*2 |
| SNR | 90dB |
| Distortion | <1% |
| Weight | 2.8kg |
| Size | 321*151*185mm |
Safety and Compliance
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device can be used in portable exposure condition without restriction.
RoHS Compliance
The table below indicates the presence of hazardous substances in the components of this product, in compliance with Chinese standards SJ/T 11363-2006 and SJ/T 11364-2006, and EU directive 2002/95/EC.
| Component Name | Pb | Hg | Cd | Cr(VI) | PBB | PBDE |
|---|---|---|---|---|---|---|
| Printed Circuit Board Assembly | O | O | O | O | O | O |
| Plastic Housing | O | O | O | O | O | O |
| Other Components | X | O | O | O | O | O |
Notes:
- O: Indicates that the concentration of the hazardous substance in all homogeneous materials of the component is below the limit specified in SJ/T 11363-2006.
- X: Indicates that the concentration of the hazardous substance in at least one of the homogeneous materials of the component is above the limit specified in SJ/T 11363-2006.
Power Adapter Recommendation
If consumers use a power adapter to charge, they should purchase a matching set of CCC certification and meet the standards required for the power adapter. The power delivered by the charger must be between a minimum of [7.5] Watts required by the radio equipment and a maximum of [15] Watts in order to achieve the maximum charging speed.
