Zealot S-67 Quick Start Manual

Product Overview

This manual provides instructions for the Zealot S-67 Bluetooth speaker. It covers basic operations, features, and specifications.

Key Components:

• Power button
• Mode button (M)
• EQ (Equalizer) button
• Play/Pause button (►)
• Volume Up / Next Song button (+)
• Volume Down / Previous Song button (-)
• USB-C port
• AUX port
• TF card slot
• USB port

1. Power On/Off

To turn on: Long press the power button for 3 seconds. You will hear a "Di dū" prompt sound.

To turn off: Long press the power button for 3 seconds. You will hear a "Di dū" prompt sound.

To reset shutdown: Long press the power button for 8 seconds.

2. Function Introduction

Mode Switching Order:

Bluetooth Mode ➔ AUX Mode ➔ TF Card Mode

To switch modes: Press and hold the "M" button. This function is available when 2 or more modes are active.

Note: When switching between TF card and AUX mode, the last inserted media will be prioritized by default.

Indicator Light Status:

• Bluetooth mode, TF card / USB flash disk mode:
• Play: Blue light flashing
• Pause: Blue light flashing
• Connected: Blue indicator is steady on

2.1 Bluetooth

2.1.1 Bluetooth Connection

1. Power on the speaker. The blue indicator will flash with the voice prompt "BLUETOOTH", indicating it has entered pairing mode.
2. On your Bluetooth device (e.g., cell phone), select "ZEALOT-S67" from the list of available devices and click to connect.
3. Upon successful connection, you will hear two prompt sounds, and the blue indicator will remain steady on.

Notices for iPhone Connection:

• If "ZEALOT-S67" appears multiple times or connection fails, ignore the previous entry, restart Bluetooth connection, and ensure Bluetooth is turned on before powering up the speaker.

Reconnection:

• Restart the speaker; it will automatically connect to the last paired device.
• If connection fails, ensure Bluetooth is enabled on your device.
• For iOS devices, turn on Bluetooth in advance for automatic connection. Otherwise, manual selection of "ZEALOT-S67" may be required.

2.1.2 TWS Connect

With both speakers turned on and within 10 meters, press the button on either machine to connect them. Subsequent connections will be automatic after the first successful pairing.

2.1.3 Bluetooth Call

• Tap: Answer/hang up call.
• Press and hold: Reject call.
• Double-tap: Call back the last dialed number.

2.1.4 Bluetooth Play

Open your music player to play music via Bluetooth.

• + (Short press 1s): Volume up / (Long press 3s): Next song
• - (Short press 1s): Volume down / (Long press 3s): Previous song
• ► (Tap): Play/Pause

The operations are the same when using TF card or USB disk mode.

2.2 Data Transmission and USB Audio Function

Connect the speaker to a computer using a USB-C cable for charging when the speaker is powered off. When powered on, the USB port can be used for data transmission. After data transmission, power on the speaker and insert a TF card. Once the mobile USB and hard disk are identified by the computer, you can copy files.

2.3 Equalizer (EQ) Function

• Vocal Mode: Click the EQ button. The green light flashes twice and stays on.
• Subwoofer Mode: Click the EQ button. The orange light flashes twice and stays on.
• Normal Mode: Click the EQ button. The blue light flashes twice and stays on.

2.4 USB Mode

Insert a USB drive. You will hear the prompt tone "USB" to play songs from the drive.

• + (Short press 1s): Volume up / (Long press 3s): Next song
• - (Short press 1s): Volume down / (Long press 3s): Previous song

2.5 TF Card Mode

Insert a TF card. You will hear the prompt tone "TF Card" to play songs from the card.

• + (Short press 1s): Volume up / (Long press 3s): Next song
• - (Short press 1s): Volume down / (Long press 3s): Previous song

2.6 AUX Mode

Connect an audio cable. You will hear the prompt tone "AUX" when the speaker switches to AUX mode.

3. Charging

1. Low Battery Warning: When the battery voltage is insufficient, you will hear the voice prompt "Low battery please charge". You can also view the speaker's power status on your connected phone.
2. Charging Process: Plug the USB-C charging cable into the speaker and the other end into an adapter or computer USB port. The red indicator light will be on during charging and will turn off when fully charged.
3. Charging Time: Varies depending on the adapter and computer USB port used.

4. Specifications

• Input Voltage: DC 5V
• Transmission Range: 10m
• SNR: >95dB
• Working Voltage: 7.4V
• Dimensions: 297*133*130mm
• Driver: 4 Ω
• Frequency Response: 80Hz-20KHz
• Distortion: <1%
• Weight: 1956g

5. Notices

• Ensure the charger model is suitable for this product before charging.
• Do not submerge the speaker in water.
• Avoid extreme temperatures.
• Unauthorized disassembly or modification by non-professionals may cause damage or explosion and is not covered by the warranty.

Tip: Keep your speaker and mobile phone within a 30-meter working range for optimal performance.