ZEALOT-S32 Wireless Speaker Quick Start Guide

Welcome

This guide provides essential information for the ZEALOT-S32 Wireless Speaker.

Please read this user manual carefully before use.

Safety Precautions

• To ensure correct use and trouble-free operation, please read this user manual carefully first.
• For the first use, it is recommended to fully charge it.
• Please use and store the product at room temperature.
• Do not expose the product to fire, high temperature, direct sunlight, etc.
• Please keep the speaker volume moderate to avoid temporary or permanent hearing impairment.
• Do not use organic solvents or other chemicals to clean the product.
• Do not let small particles enter the product.
• Do not disassemble the product or make any modifications to the product structure or any part thereof.
• If the battery is not replaced correctly, there will be an explosion accident, only the same battery type can be replaced.
• The battery (battery pack) must not be exposed to such sunlight, fire or similar overheating conditions.
• Do not throw and drop the product to avoid damage.

Packing Content

• ZEALOT-S32 Wireless Speaker
• USB Cable
• User Manual (this guide)

Operation Instructions

Power On/Off

Press the power button [Power On/Off] to turn the device on or off.

Wireless Connection

1. Turn on the speaker. The indicator light will flash [indicator light flashing].

2. Enable Bluetooth on your device and search for "ZEALOT-S32". Select it to connect.

Once connected, the indicator light will be steady [indicator light steady].

Mode Switch

Press the mode button to cycle through available modes.

Play Control

Use the play/pause, next, and previous buttons to control music playback.

Party Add (TWS Function)

For TWS (True Wireless Stereo) pairing: Turn on two ZEALOT-S32 speakers. Press and hold the play button on one speaker for more than 2 seconds. The speakers will automatically pair. The indicator light on the main speaker will flash, and the other will be steady.

Charging

Connect the USB cable to the speaker's USB-C port and a power source. The charging indicator will be lit during charging.

Technical Specifications

Compliance Information

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Innovation, Science and Economic Development Canada Compliance

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L' appareil ne doit pas produire de brouillage; (2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’ en compromettre le fonctionnement.

Environmental Information

This product complies with the Restriction of Hazardous Substances (RoHS) directive.

Note: 'o' indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit requirement of SJ/T11363-2006. 'X' indicates that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit requirement of SJ/T11363-2008. The components marked 'X' comply with EU Directive 2002/95/EC.

The period for safe environmental pollution-free use is 10 years.