Zealot ZE-01 Wireless Speaker Quick Start Guide
Packing Content
The package typically includes the ZEALOT-ZE01 wireless speaker, a USB-C cable, and this quick start guide.
Power On/Off
Press and hold the [ON/OFF] button to turn the speaker on or off.
Battery Indicator Light:
- 80%-100%: Green light is on
- 40%-70%: Yellow light is on
- ≤ 30%: Red light is on
Wireless Connection (Party Add)
To connect two ZEALOT-ZE01 speakers for stereo sound (Party Add):
- Ensure both speakers are turned on and within 1 meter (approx. 3 feet) of each other.
- On your phone, turn on Bluetooth and ensure "ZEALOT-ZE01" is not connected.
- Turn on both speakers.
- On one speaker, press and hold the [PARTYADD] button. A prompt tone indicates successful pairing.
- Turn on your phone's Bluetooth and connect to "ZEALOT-ZE01".
- Play music to test if both speakers are playing simultaneously.
Note: Subsequent connections after the first successful pairing will be automatic.
Mode Switch
Use the [MODE SWITCH] button to cycle through different modes.
Play Controls
Use the [PLAY] button for playback control.
- Press [PLAY] once: Play/Pause music.
- Press [▶] twice: Skip to the next track.
- Press [◀] twice: Go to the previous track.
- Sound Modes: Long press the Bass, Vocal, or Normal buttons to switch sound modes. (Bass: Green light, Vocal: Orange light, Normal: Default state).
Light Mode
Press the [LIGHT] button to turn the light effects on or off.
Microphone Function
This speaker supports microphone input.
- Long press the [MIC] button to turn on the microphone function.
- Long press the [MIC] button again to switch between accompaniment and original vocals.
- Press the [FREQUENCY ADJUST] button to adjust the frequency.
- Long press the [FREQUENCY ADJUST] button to switch between frequency channels A/B.
Microphone Pairing Tip: To connect two microphones, ensure they are on different channels (CHA/CHB). If both display the same channel, long press the M button on one microphone to switch its channel.
Technical Specifications
The following specifications are available in multiple languages:
- Wireless Version: 5.3
- Charging Voltage: DC 5V
- Working Voltage: 11.1V
- Transmission Distance: 10m
- Frequency Range: 20Hz-20KHz
- Speaker: 2 x Φ120mm + 2 x Φ42mm
- SNR: ≥90dB
- Distortion: ≤1%
- Weight: 5.3kg
- Size: 332*207*284mm
Charging Information
USB PD Fast Charging: The charger's power output should be between 15W (minimum) and 45W (maximum) for optimal charging speed.
Harmful Substances Information
The following table indicates the presence of hazardous substances in components:
| Component | Pb (Lead) | Hg (Mercury) | Cd (Cadmium) | Cr6+ | PBB | PBDE |
|---|---|---|---|---|---|---|
| Printed Circuit Boards | o | o | o | o | o | o |
| Plastic and Polymer Parts | X | o | o | o | o | o |
| Standard Battery | X | o | o | o | o | o |
| User Manual | o | o | o | o | o | o |
Note: 'o' indicates content is below the limit, 'X' indicates content exceeds the limit as per SJ/T11363-2006 standards.
Warnings and Precautions
To ensure correct use and trouble-free operation, please read this user manual carefully first.
- For first use, it is recommended to fully charge the device.
- Use and store the product at room temperature.
- Do not expose the product to fire, high temperatures, or direct sunlight.
- Keep the speaker volume moderate to avoid temporary or permanent hearing impairment.
- Do not use organic solvents or chemicals for cleaning.
- Do not allow small particles to enter the product.
- Do not disassemble or modify the product.
- Incorrect battery replacement may cause an explosion; only use the same battery type.
- The battery pack must not be exposed to sunlight, fire, or similar overheating conditions.
- Do not throw or drop the product to avoid damage.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment does cause harmful interference to radio or television reception, try to correct the interference by reorienting the antenna, increasing separation, connecting to a different outlet, or consulting a dealer/technician.
Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.
If consumers use a power adapter for charging, ensure it is CCC certified and meets required standards.
