ZEALOT-S97M Wireless Speaker Quick Start Guide
Packing Content
- ZEALOT-S97M Wireless Speaker
- USB-C Cable
- Microphone (Quantity: 2 implied)
- Quick Start Guide
Microphone Function
Dual Microphone Mode: Long press the power button on a microphone to turn on the 2 microphone function. This allows for dual microphone use.
Accompaniment Mode: Long press the power button on a microphone to turn the accompaniment feature on or off.
Microphone Channel Setup: To connect two microphones simultaneously, ensure they are on different channels (CHA and CHB). If both microphones display the same channel, long press the power button of one microphone to turn it off. While off, long press the power button again until it switches to the other channel. It will power on and then switch channels.
Power and Battery Indicator
Power On/Off: Use the designated power button.
Battery Indicator Light:
- 80%-100%: Green light is on.
- 40%-70%: Yellow light is on.
- Below 30%: Red light is on.
Wireless Connection
To connect your device (e.g., smartphone) to the ZEALOT-S97M speaker:
- Turn on the wireless function on your device.
- On the speaker, ensure it is discoverable or in pairing mode. The speaker's name is "ZEALOT-S97M".
- Select "ZEALOT-S97M" from your device's wireless list to connect.
Mode Switch
Use the MODE SWITCH button to cycle through available modes.
Party Add (TWS Pairing)
To connect two ZEALOT-S97M speakers together for stereo sound (True Wireless Stereo - TWS):
- Turn on both speakers. Ensure they are within 1 meter (approx. 3 feet) of each other.
- On both speakers, click the designated PARTYADD button.
- Listen for a prompt tone indicating a successful connection. A second prompt tone may indicate successful stereo pairing.
- Once paired, reconnect your device's wireless connection to the primary speaker (ZEALOT-S97M). Both speakers should now play in sync.
Equalizer Modes
The speaker features different equalizer modes, indicated by LED lights:
- Bass: Green light is on.
- Vocal: Orange light is on.
- Normal: Default state.
Charging
Connect the included USB-C cable to the speaker and a power source to charge the device.
Technical Specifications
| Specification | Value |
|---|---|
| Wireless Version | 5.2 |
| Charging Voltage | DC 5V 2A |
| Working Voltage | 7.4V |
| Transmission Distance | 10m (approx. 33 feet) |
| Frequency Range | 20Hz-20KHz |
| Speaker Configuration | 76mm*2 + 38mm*2 drivers |
| SNR (Signal-to-Noise Ratio) | 90dB |
| Distortion | <1% |
| Weight | 2.8kg (approx. 6.17 lbs) |
| Dimensions | 321mm x 151mm x 185mm |
Charger Power Requirements
The power delivered by the charger must be between a minimum of 7.5 Watts and a maximum of 15 Watts to achieve the maximum charging speed.
Safety Warnings and Precautions
To ensure correct use and trouble-free operation, please read this user manual carefully first. For first use, it is recommended to fully charge the device. Use and store the product at room temperature. Do not expose the product to fire, high temperatures, or direct sunlight. Maintain a moderate speaker volume to avoid temporary or permanent hearing impairment. Do not use organic solvents or other chemicals to clean the product. Prevent small particles from entering the product. Do not disassemble or modify the product's structure. If the battery is not replaced correctly, there is a risk of explosion; only replace with the same battery type. The battery must not be exposed to sunlight, fire, or similar overheating conditions. Do not throw or drop the product to avoid damage.
Compliance Information
This device complies with FCC rules Part 15. Operation is subject to two conditions: it must not cause harmful interference, and it must accept any interference received. Changes not expressly approved may void the user's authority to operate the equipment. This equipment complies with Class B digital device limits under FCC Rules, designed for reasonable protection against harmful interference in residential installations. If interference occurs, try reorienting the antenna, increasing separation, connecting to a different circuit, or consulting a dealer/technician. The device meets general RF exposure requirements and can be used in portable exposure conditions without restriction.
For consumers using a power adapter, ensure it has CCC certification and meets required standards.
The product is compliant with RoHS standards, indicated by the absence of restricted substances like Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr 6+), Polybrominated Biphenyls (PBB), and Polybrominated Diphenyl Ethers (PBDE).
