ZEALOT-S49 Wireless Speaker Quick Start Guide

Getting Started & Basic Operations

Powering On/Off

Press and hold the power button [power-button] to turn the speaker on or off. The indicator light [indicator-light] will flash when pairing.

Mode Switching

Press the 'M' button [mode-button] to switch between modes (e.g., Bluetooth, AUX).

Playback Controls

Use the playback buttons [playback-controls] for:

Play/Pause: Press the play/pause button [play-pause-button].
Volume Up/Down: Press and hold the '+' or '-' buttons [volume-buttons].
Next/Previous Track: Short press the '+' or '-' buttons [track-skip-buttons].

Light Control

Press the light button [light-button] to turn the LED lights on or off, or cycle through light modes.

Wireless Connection (Bluetooth Pairing)

Ensure Bluetooth is enabled on your device. The speaker will enter pairing mode automatically when powered on, indicated by a flashing light [flashing-indicator]. Select "ZEALOT-S49" from your device's Bluetooth list to connect.

Incoming Calls

When a call is received, the speaker may indicate this [call-indicator]. You can typically answer or end calls using the play/pause button [play-pause-button].

PartyAdd Mode

To connect two ZEALOT-S49 speakers for stereo sound, long-press the 'M' button [mode-button] on one speaker while both are powered on and in Bluetooth pairing mode.

Charging

Connect the included USB-C cable [usb-c-cable] to the USB-C port [usb-c-port] on the speaker and a compatible power source. The speaker should be fully charged before first use.

Important Safety Warnings

To ensure correct and safe operation, please adhere to the following:

Read this user manual carefully before use.

Fully charge the speaker before the first use.

Use and store the product at room temperature.

Do not expose the product to fire, high temperatures, or direct sunlight.

Maintain moderate speaker volume to prevent temporary or permanent hearing impairment.

Do not use organic solvents or harsh chemicals for cleaning.

Keep small particles away from the product.

Do not disassemble or modify the product's structure.

Battery replacement must be done with the same battery type only. Incorrect replacement can cause explosion.

Do not expose the battery to sunlight, fire, or similar overheating conditions.

Avoid dropping or throwing the product to prevent damage.

Technical Specifications

Feature	Specification
Wireless Version	5.2
Charging Voltage	DC 5V
Working Voltage	3.7V
Transmission Distance	10m (33 ft)
Frequency Range	20Hz - 20KHz
Speaker Size	Φ57mm (57mm diameter)
Signal-to-Noise Ratio (SNR)	≥85dB
Distortion	1%
Weight	530g
Dimensions	85mm x 88mm x 141mm

Feature

Specification

Wireless Version

5.2

Charging Voltage

DC 5V

Working Voltage

3.7V

Transmission Distance

10m (33 ft)

Frequency Range

20Hz - 20KHz

Speaker Size

Φ57mm (57mm diameter)

Signal-to-Noise Ratio (SNR)

≥85dB

Distortion

Weight

530g

Dimensions

85mm x 88mm x 141mm

FCC Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Harmful Substance Content Information

In accordance with China's regulations on the control of pollution from electronic information products, the following table lists the names of electronic product components and their toxic or hazardous substance content.

Part Name	Pb (Lead)	Hg (Mercury)	Cd (Cadmium)	Cr (Hexavalent Chromium)	PBB (Polybrominated Biphenyls)	PBDE (Polybrominated Diphenyl Ethers)
Printed Circuit Board	o	o	o	o	o	o
Plastic and Polymer Parts	o	o	o	o	o	o

Part Name

Pb (Lead)

Hg (Mercury)

Cd (Cadmium)

Cr (Hexavalent Chromium)

PBB (Polybrominated Biphenyls)

PBDE (Polybrominated Diphenyl Ethers)

Printed Circuit Board

Plastic and Polymer Parts

Notes:

'o' indicates that the content of the hazardous substance in all homogeneous materials of this part is below the limit requirements specified in SJ/T 11363-2006.

'X' indicates that the content of the hazardous substance in at least one homogeneous material of this part exceeds the limit requirements specified in SJ/T 11363-2008.

Parts marked with 'X' above comply with EU Directive 2002/95/EC, which restricts the use of hazardous substances in electronic/electrical products.

The period during which the toxic or hazardous substances or elements contained in this electronic information product will not leak, cause pollution to the environment, or cause serious damage to human body or property, when used under the conditions described in this manual, is 10 years.

	FCC RF Exposure Evaluation for ZEALOT-S49 Wireless Speaker This document details the FCC RF exposure evaluation for the ZEALOT-S49 wireless speaker and its related models, outlining product specifications, evaluation methods, and compliance with RF exposure limits for portable devices.
	ZEALOT-S49 Wireless Speaker Quick Start Guide A concise guide to setting up and using the ZEALOT-S49 wireless speaker, covering packing contents, charging, power operations, wireless connection, mode switching, playback controls, and light modes. Includes technical specifications and important warnings.
	ZEALOT Wireless Speaker Model Equivalence FCC Declaration SHENZHEN ZEALOT DIGITAL TECHNOLOGY CO., LTD declares that various ZEALOT wireless speaker models share identical internal components, differing only in external appearance for marketing purposes, as submitted to the FCC.
	ZEALOT-PT02 Wireless Speaker Quick Start Guide This document provides a quick start guide for the ZEALOT-PT02 wireless speaker, detailing its technical specifications, features, operation, safety warnings, and compliance information in multiple languages, with English as the primary language.
	Zealot ZE-01 Wireless Speaker Quick Start Guide A quick start guide for the Zealot ZE-01 wireless speaker, detailing setup, features like Party Add and microphone functionality, technical specifications, charging information, and safety warnings. The guide is presented primarily in English with extensive multilingual support.
	ZEALOT-S32 Wireless Speaker Quick Start Guide A concise guide to setting up and using the ZEALOT-S32 wireless speaker, covering features, technical specifications, operation instructions, and safety precautions.
	ZEALOT-S97 Wireless Speaker Quick Start Guide and Specifications Concise guide for the ZEALOT-S97 Wireless Speaker, covering setup, features, TWS pairing, light control, equalizer modes, charging, technical specifications, and safety information. Includes multilingual warnings and FCC compliance.
	SHENZHEN ZEALOT DIGITAL TECHNOLOGY CO., LTD Wireless Speaker Test Report This document details the test results for the ZEALOT Wireless Speaker (Model: ZEALOT-M1) conducted by Shenzhen Bangce Testing Technology Co., Ltd. according to 47 CFR Part 15.247 standards.