M03K COMMAND URBAN™

Extended Warranty

Available in U.S. only. Extend your warranty for an additional 4 years from date of purchase for $5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during normal business hours. Payment must be made within 30 days of purchase. Name, address, telephone number, purchase date, and 5-digit model number required. You can also mail a check for $5 to: Timex Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203.

Please read instructions carefully to understand how to operate your Timex® watch. Your model may not have all of the features described in this booklet.

Functions

• Real-time calendar clock
• Three time zones
• 64 World Time (WT) cities / 30 time zones
• Chronograph and lap/split recording
• Countdown timer
• Daily/weekday/weekend alarm
• Hourly chime
• INDIGLO® night-light with Night-Mode® feature

Basic Operation

When setting, each button has a different function as indicated above. Watch face will indicate when button changes function.

Watch Diagram Buttons:

• SET (SET / DONE)
• MODE (MODE / NEXT)
• START/SPLIT (START/SPLIT)
• INDIGLO® BUTTON
• STOP/RESET (STOP/RESET)

Time/Date/Mode Displays

Three time zones (T1, T2, T3) for quick view of user-selected world cities. World Time cities are selected by user for each time zone.

1. In TIME mode, press and hold SET. The Time Zone (1, 2 or 3) will flash, and press ▶️ or ◀️ to change. Press NEXT to select the displayed time zone.
2. Press ▶️ to scroll World Time city in ascending alphabetical order, press ◀️ to scroll in descending alphabetical order.
3. Press NEXT. The DST (Daylight Saving Time) setting will flash.
4. Press ▶️ or ◀️ to turn DST ON or OFF. If DST is set to ON, the DST indicator will appear and time will advance by 1 hour.
5. Press NEXT. Hour digits flash.
6. Press ▶️ or ◀️ to change hour including AM/PM. (Scroll through 12 hours to get to AM/PM). Hold ▶️ or ◀️ to change rapidly.
7. Press NEXT. Minutes digits flash. Press ▶️ or ◀️ to change minutes. Hold ▶️ or ◀️ to change rapidly.
8. Press NEXT. Seconds digits flash. Press ▶️ or ◀️ to set seconds to zero.
9. Press NEXT. Month flashes. Press ▶️ or ◀️ to change month. Hold ▶️ or ◀️ to change rapidly.
10. Press NEXT. Date flashes. Press ▶️ or ◀️ to change date. Hold ▶️ or ◀️ to change rapidly.
11. Press NEXT and continue setting pattern for Year, 12-hour or 24-hour Time Display, MM-DD or DD.MM Date Format, sort by City Name or UTC Offset, Alert Type (TONE, VIBE or COMBO), Hourly Chime on/off, Button Beep on/off, World Time mode (show or hide), Chrono mode (show or hide), Countdown Timer mode (show or hide), Alarm 1 mode (show or hide), Alarm 2 mode (show or hide), Alarm 3 mode (show or hide).
12. NOTE: If you select BEEP on, a beep will sound every time you push a button (except INDIGLO® BUTTON).
13. Press DONE to confirm and exit or MODE to continue and reset first time zone, or set second and/or third time zones, if desired.

Displaying Alternate Time Zones

1. When in Time mode, press [START/SPLIT] once or twice to "preview" one of the other two time zones for 3 seconds (T1, T2 or T3 flashes).
2. To switch that time zone to the displayed one, continue to hold [START/SPLIT] for 4 seconds.

World Time

To view 64 World Time cities / 30 time zones, view and set DST and Sort Order for each of those time zones.

1. Press [MODE] until WORLD appears.
2. Press ▶️ to scroll each World Time city in an Eastward direction, press ◀️ to scroll in a Westward direction.
3. NOTE: If you select "City Name" in Step 4 (below), press ▶️ to view each city in ascending alphabetical order or press ◀️ to view each city in descending alphabetical order.
4. Press [SET] for each displayed time zone, and ▶️ or ◀️ to turn DST ON or OFF. If DST is set to ON, the DST indicator will appear and time will advance by 1 hour.
5. Press [NEXT] to select Sort Order. Press ▶️ or ◀️ to select UTC Offset or City Name.
6. Press [DONE] to exit World Time set mode.

Chrono

LAP TIMES: LAP 1 = 7.11, LAP 2 = 7.50, LAP 3 = 7.08, LAP 4 = 7.30

SPLIT TIMES: SPLIT 1 = 7.11, SPLIT 2 = 15.01, SPLIT 3 = 22.09, SPLIT 4 = 29.39

1. Press [MODE] until CHRONO appears.
2. Press and hold [SET].
3. The Display will read: FORMAT/SET, then LAP/SPL or SPL/LAP. Press ▶️ or ◀️ to select desired format. See the table above to explain LAP vs. SPLIT timing.
4. Press [DONE] to confirm and exit.
5. To USE Chrono mode, press [START/SPLIT]. The chronograph continues to run even if you exit the mode.
6. Press [START/SPLIT] to take a split. Lap and split times will then be displayed in the format you selected. The lap number will appear in the top line of the display.
7. NOTE: Lap and split times will appear for 10 seconds while the chronograph runs in the background. Press [MODE] to release the display and see the running chronograph.
8. Press [STOP/RESET] to pause the chronograph.
9. Press [START/SPLIT] to resume timing or press and hold [STOP/RESET] to reset the chronograph.

Countdown Timer

1. Press [MODE] repeatedly until TIMER appears.
2. To SET the Timer, press and hold [SET]. Hour digits flash, and HOURS appears on the bottom line.
3. Press ▶️ or ◀️ to change the hours. Hold ▶️ or ◀️ to change rapidly.
4. Press [NEXT]. Minutes digits flash, and MINUTES appears on the bottom line.
5. Press ▶️ or ◀️ to change the minutes. Hold ▶️ or ◀️ to change rapidly.
6. Press [NEXT]. Seconds digits flash, and SECONDS appears on the bottom line.
7. Press ▶️ or ◀️ to change the seconds. Hold ▶️ or ◀️ to change rapidly.
8. Press [NEXT]. STOP or REPEAT (AT END) flash. Press ▶️ or ◀️ to change the action.
9. Press [DONE] to confirm and exit.
10. To USE the Timer, press [START/SPLIT] to begin the countdown.

NOTE:

a. If REPEAT (AT END) was selected, the REP # will appear on the top line.

b. If STOP (AT END) was selected, the [stop symbol] will flash.

c. If REPEAT (AT END) was selected, the [repeat symbol] will flash.

11. At the end of the countdown, your watch will alert you. Press any button to stop the alert.

NOTE: Your alert is based on the Alert Type selected in Time set mode.

a. For TONE, the watch will sound and the INDIGLO® night-light will flash when the timer has reached zero, or when it starts to count down again.

b. For VIBE, the watch will vibrate and the INDIGLO® night-light will flash when the timer has reached zero, or when it starts to count down again.

c. For COMBO, the watch will vibrate and the INDIGLO® night-light will flash and then the watch will sound and the INDIGLO® night-light will flash when the timer has reached zero, or when it starts to count down again.

d. For REPEAT (AT END), settings under 30 seconds will be alerted by a single beep, no matter the selected Alert Type.

12. Press [STOP/RESET] to pause the Timer.

13. Press [START/SPLIT] to resume the Timer or press [STOP/RESET] to reset countdown time to its last setting.

Alarm

Setting the Alarm is similar to setting Time. Your watch model has three alarms. Follow below procedure to set each alarm.

1. Press [MODE] repeatedly until ALARM 1, ALARM 2, or ALARM 3 appears, and stop at the alarm you want to set.
2. Press [SET] to set alarm.
3. Hour digits flash. Press ▶️ or ◀️ to change hour. Hold ▶️ or ◀️ to change rapidly.
4. Press [NEXT]. Minutes digits flash. Press ▶️ or ◀️ to change minutes. Hold ▶️ or ◀️ to change rapidly.
5. Press [NEXT]. If in 12-hour format, AM/PM flashes. Press ▶️ or ◀️ to change.
6. Press [NEXT]. Press ▶️ or ◀️ to select DAILY, WKDAYS OR WKENDS frequency.
7. Press [NEXT] to go back to change other settings, or press [DONE] to confirm and exit.
8. Press [START/SPLIT] or [STOP/RESET] to arm or disarm alarm. When disarmed, OFF will be displayed. When armed, the [alarm symbol] and the alarm frequency will appear in lower line of the display.
9. When the alarm time is reached, the INDIGLO® night-light flashes and the selected alert runs for about 10 seconds.
10. Press any button to stop the alert.
11. A one-time backup alarm will sound after five minutes if no button is pressed during the alert. The [snooze symbol] flashes to indicate the backup alarm is pending.

INDIGLO® Night-Light / Night-Mode® Feature

Press [INDIGLO® BUTTON] to activate night-light. Electroluminescent technology used in INDIGLO® night-light illuminates entire watch face at night and in low light conditions. While the night-light is on pressing any button keeps it on for three seconds.

Press and hold [INDIGLO® BUTTON] for 4 seconds to activate NIGHT-MODE® feature. The [moon icon] will appear. Once activated, any button pushed will cause INDIGLO® night-light to stay on for 3 seconds. NIGHT-MODE® feature will stay activated for 8 hours or until deactivated by pressing and holding [INDIGLO® BUTTON] again for 4 seconds.

Water and Shock Resistance

*pounds per square inch absolute

WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY BUTTONS UNDER WATER.

1. Watch is water-resistant only as long as lens, push buttons and case remain intact.
2. Watch is not a diver watch and should not be used for diving.
3. Rinse watch with fresh water after exposure to salt water.
4. Shock-resistance will be indicated on watch face or caseback. Watches are designed to pass ISO test for shock-resistance. However, care should be taken to avoid damaging crystal/lens.

Battery

Timex strongly recommends that a retailer or jeweler replace battery. If applicable, push reset button when replacing battery. Battery type is indicated on caseback. Battery life estimates are based on certain assumptions regarding usage; battery life may vary depending on actual usage.

DO NOT DISPOSE OF BATTERY IN FIRE. DO NOT RECHARGE. KEEP LOOSE BATTERIES AWAY FROM CHILDREN.

Timex International Warranty

Visit www.timex.com/productWarranty.html for warranty details.