Timex Watch User Manual

Features and Basic Operation

• Time with 12- or 24-hour format
• Date with MM-DD or DD.MM format
• 3 time zones
• Alerts with audible tone and/or silent vibration
• Optional hourly chime
• 100-hour chronograph with display of lap and split times
• 24-hour countdown timer (countdown and stop or repeat)
• Occasion reminders
• Hydration timer
• 3 daily/weekday/weekend alarms with 5-minute backup
• Customizable mode set (hide unwanted modes)
• INDIGLO® night-light with NIGHT-MODE® feature

Press MODE repeatedly to step through modes: Chrono, Timer, Occasion, Hydration, Alarm 1, Alarm 2, and Alarm 3. Press MODE to exit current mode and return to Time mode.

Button functions shown with secondary functions in parentheses.

Time

To set time, date, and options:

1. With time and date showing, press and hold SET.
2. Current time zone (1, 2, or 3) flashes. Press + or – to select time zone to set, if desired.
3. Press NEXT. Hour flashes. Press + or – to change hour (including AM/PM); hold button to scan values.
4. Press NEXT. Minutes flash. Press + or – to change minutes.
5. Press NEXT. Seconds flash. Press + or – to set seconds to zero.
6. Press NEXT. Month flashes. Press + or – to change month.
7. Press NEXT. Day flashes. Press + or – to change day.
8. Press NEXT. Year flashes. Press + or – to change year.
9. Press NEXT to set options. Press + or – to change value and then press NEXT to go to next option. Press DONE at any step to exit and save settings.

Available options include 12- or 24-hour time format, MM-DD or DD.MM date format, tone or vibration alert, hourly chime, beep for button presses, customizable mode set (select “HIDE” for unwanted modes – they are removed from mode sequence).

If you hide a mode, you can turn it back on later using procedure above.

Press START·SPLIT once and hold to see 2nd time zone. Press START·SPLIT twice and hold to see third time zone. Continue to hold button for 4 seconds to switch to displayed time zone.

Press and hold STOP·RESET to see next upcoming occasion (see description of Occasion mode). Release and immediately press and hold again to see subsequent occasions.

Dual mode offers choice of alert type for alarms and countdown time: audible tone, silent vibration or combination of vibration followed by tone. To set, refer to point 9.

Chronograph

This mode provides a chronograph (stopwatch) function. Press MODE to go to Chrono mode.

To start, press START·SPLIT. Chrono counts up by hundredths of a second up to one hour, then by seconds up to 100 hours. Stopwatch icon [stopwatch] flashes to indicate chrono is running.

To stop, press STOP·RESET. Stopwatch icon [stopwatch] freezes to indicate chrono is stopped.

To resume, press START·SPLIT, or to reset (clear) chrono, press and hold STOP·RESET.

When chrono is already running, chrono continues to run if you exit mode. Stopwatch icon [stopwatch] appears in TIME mode.

While chrono is running, press START·SPLIT to take a split. Lap and split times will be displayed with lap number.

• LAP 1 = 7.11
• SPLIT 1 = 7.11
• LAP 2 = 7.50
• SPLIT 2 = 15.01
• LAP 3 = 7.08
• SPLIT 3 = 22.09
• LAP 4 = 7.30
• SPLIT 4 = 29.39

To set display format, press SET. Then, press + or – to select desired format. Press DONE to exit.

NOTE: When a split is taken, times are frozen on the display for 10 seconds. Press MODE to release display and show running chrono immediately.

Timer

Timer mode provides a countdown timer with alert. Press MODE repeatedly until TIMER appears.

To set countdown time:

1. Press SET. Hours flash. Press + or – to change hours; hold button to scan values.
2. Press NEXT. Minutes flash. Press + or – to change minutes.
3. Press NEXT. Seconds flash. Press + or – to change seconds.
4. Press NEXT. Action at end of countdown flashes. Press + or – to select STOP or REPEAT, indicated by hourglass icon [hourglass] with arrow.
5. Press DONE at any step when done setting.

To start timer, press START·SPLIT. Timer counts down every second from countdown time. Hourglass icon [hourglass] flashes to indicate timer is running.

To pause countdown, press STOP·RESET. Hourglass icon [hourglass] freezes to indicate timer is stopped.

To resume countdown, press START·SPLIT, or to reset countdown, press STOP·RESET.

Watch beeps and night-light flashes when countdown ends (timer reaches zero). Press any button to silence. If REPEAT AT END selected, timer repeats countdown indefinitely.

Timer continues to run if you exit mode. Hourglass icon [hourglass] appears in Time mode.

Hydration Timer

Hydration mode provides a countdown timer with alert to remind you to drink during a workout. Press MODE repeatedly until HYDRA appears.

To set hydration time:

1. Press SET. Minutes flash. Press + or – to change minutes; hold button to scan values.
2. Press NEXT. Seconds flash. Press + or – to change seconds; hold button to scan values.
3. Press DONE at any step, when done setting.

To start hydration timer, press START·SPLIT. Timer counts down every second from countdown time. Drop icon [water drop] flashes to indicate timer is running.

To pause countdown, press STOP·RESET. Drop icon [water drop] freezes to indicate timer is stopped.

To resume countdown, press START·SPLIT, or to reset countdown, press STOP·RESET.

Watch beeps and night-light flashes when countdown ends (timer reaches zero). Press any button to stop alert.

Hydration timer continues to run, if you exit mode. Drop icon [water drop] appears in Time mode.

Alarms

The watch has three alarms. Press MODE repeatedly until ALM 1, ALM 2, or ALM 3 appears.

To set alarm:

1. Press SET. Hour flashes. Press + or – to change hour; hold button to scan values.
2. Press NEXT. Minutes flash. Press + or – to change minutes.
3. Press NEXT. AM/PM flashes if in 12-hour time format. Press + or – to change.
4. Press NEXT. Alarm day setting flashes. Press + or – to select DAILY, WKDAYS, or WKENDS.
5. Press DONE at any step when done setting.

To turn alarm on/off, press START·SPLIT. Alarm clock icon [alarm clock] appears when alarm is on in this mode and in Time mode.

When alarm sounds, night-light flashes. Press any button to silence. If no button is pressed, alarm will sound for 20 seconds and repeat once five minutes later.

Each of the three alarms has a different alert melody.

Occasions

Occasion mode allows you to set reminders for occasions, like birthdays, anniversaries, holidays, and appointments. Press MODE repeatedly until OCCASN appears.

Today's date is shown with today's occasion in top line. Press + or – to step through dates; hold button to scan dates. Occasion for displayed date is always shown. Non-recurring occasions may be set for dates up to one year in advance.

To set occasion:

1. Press SET. Date flashes. Press + or – to select date; hold button to scan dates. Occasion for displayed date is always shown.
2. Press NEXT. Occasion flashes. Press + or – to change occasion. ANNIV, BDAY, BILL-YR, and HOLI-YR repeat yearly and BILL-MO repeats monthly.
3. To set occasions for other dates, press NEXT and select date and occasion as in previous steps.
4. Press DONE at any step when done setting.

Occasion Reminders: Watch alerts you of occasions at 8:00 AM on day of occasion. You may choose to receive no alert or an alert at a different time or day. You may choose different alerting for each occasion type. E.g., all birthdays may alert one day prior while all holidays may have no alert.

To set occasion reminder alerts:

1. Go to today's date by pressing + or – (hold button to scan dates). You may also go to today's date by simply entering Occasion mode.
2. From today's date, press – to go to ALERT SETUP.
3. Press SET. Occasion type flashes. Press + or – to select occasion type. Your settings will affect all occasions of the selected type.
4. Press NEXT. Alert status (ON/OFF) flashes. Press + or – to turn alert on or off for selected occasion type. If OFF selected, next 4 steps are skipped.
5. Press NEXT. Alert time hour flashes. Press + or – to change hour; hold button to scan values.
6. Press NEXT. Alert time minutes flash. Press + or – to change minutes.
7. Press NEXT. AM/PM flashes if in 12-hour time format. Press + or – to change.
8. Press NEXT. Alert day flashes. Press + or – to set alert for 0 - 9 days prior to occasion.
9. To set alerts for other occasion types, press NEXT. Occasion type flashes. Select occasion type as in step 3 and continue with setting procedure.
10. Press DONE at any step when done setting.

Hand icon [hand] appears when displayed occasion type has a reminder alert. When alert sounds in Time mode, hand icon [hand] flashes. Press any button to silence. See Time mode for instructions on viewing upcoming occasions.

TIP: For reminder at end of every month, set BILL-MO for first of month and alert one day prior.

INDIGLO® Night-Light with NIGHT-MODE® Feature

Press INDIGLO® button to illuminate watch display for 2 - 3 seconds (5 - 6 seconds while setting). Electroluminescent technology used in the INDIGLO® button night-light illuminates entire watch face at night and in low light conditions. Any button pressed while INDIGLO® button night-light is on keeps it on.

Press and hold INDIGLO® for 4 seconds to activate NIGHT-MODE® feature. Moon icon [moon] will appear in Time mode. Feature causes any button press to activate INDIGLO® night-light for 3 seconds. NIGHT-MODE feature may be deactivated by pressing and holding INDIGLO® again for 4 seconds, or it automatically deactivates after 8 hours.

Water Resistance

If your watch is water-resistant, meter marking or (O) is indicated.

*pounds per square inch absolute

WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY BUTTONS UNDER WATER.

1. Watch is water-resistant only as long as lens, push buttons and case remain intact.
2. Watch is not a diver watch and should not be used for diving.
3. Rinse watch with fresh water after exposure to salt water.
4. Shock-resistance will be indicated on watch face or caseback. Watches are designed to pass ISO test for shock-resistance. However, care should be taken to avoid damaging crystal/lens.

Battery

The watch button cell or coin battery is not intended to be replaced by a consumer. Only a jeweler or other professional is to replace the battery.

Important Safety Information: Button Cell Battery

WARNING: This product contains a button cell or coin battery.

DEATH or serious injury can occur if ingested.

A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.

KEEP new and used batteries OUT OF REACH of CHILDREN.

Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.

Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.

Even used batteries may cause severe injury or death.

Call a local poison control center for treatment information.

Battery type: lithium metal, CR2032.

Nominal battery voltage: 3.0 V.

Non-rechargeable batteries are not to be recharged.

Do not force discharge, recharge, disassemble, heat above 158°F (70°C) or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.

Ensure the batteries are installed correctly according to polarity (+ and -).

Do not mix old and new batteries, different brands or types of batteries, such as alkaline, carbon zinc, or rechargeable batteries.

Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.

Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.

Timex International Warranty

For warranty information, please visit: www.timex.com/pages/warranty-repair

©2024 Timex Group USA, Inc. TIMEX and INDIGLO are trademarks of Timex Group B.V. and its subsidiaries.