HOMCOM 83B-142V01/83B-142V00 Media Console Assembly Guide
Estimated Assembly Time: 90 Minutes ⏰
Total Steps: 12 ?
Important: Retain for future reference. Read carefully.
Parts List
| Part # | Description | Quantity |
|---|---|---|
| 1 | Top Panel | x 1 |
| 2 | Left Side Panel | x 1 |
| 3 | Right Side Panel | x 1 |
| 4 | Back Panel (Left) | x 1 |
| 5 | Bottom Panel | x 1 |
| 6 | Shelf Panel | x 1 |
| 7 | Drawer Front (Left) | x 1 |
| 8 | Drawer Front (Right) | x 1 |
| 9 | Drawer Side (Left) | x 1 |
| 10 | Drawer Side (Right) | x 1 |
| 11 | Drawer Back | x 1 |
| 12 | Support Bar | x 1 |
| 13 | Drawer Bottom | x 1 |
Hardware List
| Identifier | Description | Quantity |
|---|---|---|
| A | Screw M6*35 | x 32 (+2 spare) |
| B | Cam Lock | x 32 (+2 spare) |
| C | Cam Dowel | x 7 |
| D | Screw | x 34 (+2 spare) |
| E | Screw | x 10 (+2 spare) |
| F | Foot Pad | x 8 |
| G | Hinge | x 4 |
Assembly Steps
Step 1 (01)
Attach hardware to the Top Panel (1). Insert 6x Screw (A) and 3x Cam Dowel (C) into the pre-drilled holes on the underside of the Top Panel (1).
Diagram shows hardware being inserted into Panel 1.
Step 2 (02)
Prepare the side and back panels. Insert 12x Screw (A) and 4x Cam Dowel (C) into the Left Side Panel (2), Right Side Panel (3), and Back Panel (Left) (4) as indicated.
Diagram shows hardware being inserted into Panels 2, 3, and 4.
Step 3 (03)
Connect the Support Bar (12) to the Left Side Panel (2) and Bottom Panel (5) using 4x Cam Lock (B). Ensure the Cam Lock head is centered in the Cam Lock hole before tightening. Turn Cam Lock clockwise ? to tighten.
Diagram shows the Support Bar (12) being attached to the Left Side Panel (2) and Bottom Panel (5) with Cam Locks (B). The inset shows how to orient and tighten the Cam Lock.
Step 4 (04)
Connect the Support Bar (12) to the Right Side Panel (3) and Bottom Panel (5) using 4x Cam Lock (B). Turn Cam Lock clockwise ? to tighten.
Diagram shows the Support Bar (12) being attached to the Right Side Panel (3) and Bottom Panel (5) with Cam Locks (B).
Step 5 (05)
Attach the Shelf Panel (6) between the Left Side Panel (2) and Back Panel (Left) (4) using 4x Cam Lock (B). Turn Cam Lock clockwise ? to tighten.
Diagram shows the Shelf Panel (6) being attached between the Left Side Panel (2) and Back Panel (Left) (4) using Cam Locks (B).
Step 6 (06)
Assemble the drawer components. Attach Drawer Side (Right) (10) and Drawer Side (Left) (9) to the Drawer Back (11) using 2x Screw (A) and 2x Cam Lock (B) on each side. Then attach the Drawer Front (Right) (8) and Drawer Front (Left) (7) to the drawer sides using hardware.
Diagram shows the assembly of drawer sides (9, 10) to the drawer back (11) using screws (A) and cam locks (B). It also shows the attachment of drawer fronts (7, 8).
Step 7 (07)
Connect the assembled drawer sides (10, 9) and drawer back (11) to the main unit structure. Attach the Back Panel (Left) (4) to the unit using hardware B. Attach the drawer sides (10, 9) to the main unit structure using hardware B.
Diagram shows the main unit structure being assembled with panels 2, 3, 5, 6, 12, and 4. Drawer sides (10, 9) are also being attached to the main frame.
Step 8 (08)
Insert the Drawer Bottom (13) into the grooves of the assembled drawer sides and back. Slide the Drawer Bottom (13) into place.
Diagram shows the Drawer Bottom (13) being slid into the assembled drawer frame.
Step 9 (09)
Attach the Top Panel (1) to the main unit. Secure the Top Panel (1) using 6x Cam Lock (B) into the corresponding holes on the side panels (2, 3) and back panel (4). Turn Cam Lock clockwise ? to tighten.
Diagram shows the Top Panel (1) being placed on the assembled unit and secured with Cam Locks (B).
Step 10 (10)
Install drawer runners and hinges. Attach hinges (G) to the drawer fronts (7, 8) and the main unit using Screws (D). Attach drawer runners to the drawer sides (9, 10) and the main unit using Screws (D).
Diagram shows the installation of hinges (G) onto drawer fronts (7, 8) and the unit, and drawer runners onto drawer sides (9, 10) and the unit, using screws (D).
Step 11 (11)
Adjust hinges. The diagrams show how to adjust the hinges for proper door alignment. This typically involves rotating screws on the hinge to move the door up/down (⬆️⬇️), left/right (⬅️➡️), or in/out (↩️↪️).
Three sets of diagrams showing hinge adjustment. Each set shows a hinge with arrows indicating adjustment directions (rotation, sliding).
Step 12 (12)
Attach the feet. Screw 8x Foot Pads (F) into the designated holes on the underside of the Bottom Panel (5). The diagram shows a 90° angle for screw insertion and a close-up of attaching the foot pad.
Diagram shows the underside of the unit with Foot Pads (F) being screwed in. Insets show a 90-degree angle for screw insertion and the final attachment of the foot pad.
