HOMCOM Recliner Chair with Footstool
Model: IN240700044V01_GL / 83B-097V00
Important Information & Care
Important: Retain for future reference. Read carefully.
For domestic use only.
Instructions for Use:
- Put the chair stably on a flat floor.
- Stay away from open flames.
- Avoid overloading the chair.
Precautions Before Assembly:
- Prepare a clean and dry mounting area.
- Verify that the product is not damaged.
- Check that none of the pieces are missing.
Maintenance:
- Clean with a soft fabric.
- Check the seating regularly.
Storage Conditions:
- The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.
Warning: Beware of crushing and cutting hazards during assembly. The manufacturer declines all responsibility in case of damages due to bad installation or weathering. If the seating is fitted with powered seat height adjustments, only trained personnel may replace or repair those components.
Parts List
| Part No. | Description | Quantity |
|---|---|---|
| 1 | Base (Star-shaped legs) | 1 |
| 2 | Support Column | 1 |
| 3 | Seat Cushion | 1 |
| 4 | Gas Lift Cover | 1 |
| 5 | Base Support Arms (Legs) | 5 |
| 6 | Gas Lift Cylinder | 1 |
| 7 | Mechanism | 1 |
| 8 | Seat Assembly | 1 |
| 9 | Backrest | 1 |
Hardware List
| Hardware No. | Description | Quantity |
|---|---|---|
| 10 | Screw M6*16 | 5 (+1 spare) |
| 11 | Screw M6*20 | 4 (+1 spare) |
| 12 | Screw M8*25 | 8 (+1 spare) |
| 13 | Washer 22*8*2 | 8 (+1 spare) |
| 14 | Washer M8 | 4 (+1 spare) |
| 15 | Allen Key M5 | 1 |
Assembly Instructions
Step 01: Attach the Support Column (2) to the underside of the Seat Cushion (3) using four M6*20 screws (11). Tighten screws to approximately 70%.
Step 02: Fully tighten the four M6*20 screws (11) securing the Support Column (2) to the Seat Cushion (3).
Step 03: Attach the Base (1) to the Seat Cushion (3) assembly.
Step 04: Attach the Base Support Arms (5) to the central hub of the Base (1) using five M6*16 screws (10). Tighten screws to approximately 70%.
Step 05: Fully tighten the five M6*16 screws (10) securing the Base Support Arms (5) to the Base (1).
Step 06: Insert the Gas Lift Cylinder (6) into the center of the assembled Base (1). Place the Gas Lift Cover (4) over the Gas Lift Cylinder (6).
Step 07: Attach the Mechanism (7) to the underside of the Seat Assembly (8) using four M8*25 screws (12) and four 22*8*2 washers (13). Tighten screws to approximately 70%.
Step 08: Fully tighten the four M8*25 screws (12) securing the Mechanism (7) to the Seat Assembly (8).
Step 09: Attach the Backrest (9) to the Mechanism (7) using four M8*25 screws (12) and four M8 washers (14). Tighten screws to approximately 70%.
Step 10: Fully tighten the four M8*25 screws (12) securing the Backrest (9) to the Mechanism (7).
Step 11: Place the assembled Seat (8) onto the Gas Lift Cylinder (6).
Assembly Complete.
Customer Support
If you have any questions, please contact our customer care center. Our contact details are below:
United States (US)
Phone: 001-877-644-9366
Email: customerservice@aosom.com
Imported by Aosom LLC, 27150 SW Kinsman Rd Wilsonville, OR 97070 USA. Made in China.
Canada (CA)
Phone: 416-792-6088
Email: customerservice@aosom.ca
Imported by Aosom Canada Inc., 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9. Made in China.
United Kingdom (UK)
Phone: 0044-800-240-4004
Email: enquiries@mhstar.co.uk
Importer Address: MH STAR UK LTD, Unit 27, Perivale Park, Horsenden lane South, Perivale, UB6 7RH. Made in China.
