HOMCOM 83B-353V00 Sofa

Important Information & General Guidance

Please read these instructions carefully and retain them for future reference. This product is intended for domestic use only.

Instructions for Use

• Place the sofa stably on a flat floor.
• Keep away from open flames and heat sources.
• Do not overload the sofa.

Precautions Before Assembly

• Prepare a clean and dry assembly area.
• Verify that the product is not damaged.
• Check that all parts are present before starting assembly.

Maintenance

• Clean the sofa with a soft cloth.
• Regularly inspect the sofa's structure for any issues.

Storage Conditions

• Fabric parts should be stored completely dry in a clean and dry place to prevent mold.

Safety Warnings

• Beware of crushing and cutting hazards during assembly.
• The manufacturer is not responsible for damages caused by incorrect installation or exposure to weather conditions.
• If the sofa is equipped with powered seat height adjustments, only qualified personnel should perform repairs or replacements on these components.

Cushion Restoration

Your sofa cushions are vacuum-packed for shipping. To restore their shape, follow these steps:

• Carefully open the vacuum bag, avoiding damage to the cushion.
• Gently press from the sides to allow air to enter.
• Press from the front to ensure even expansion of the cushion.
• Adjust each section until the surface is even and uniform.
• Place the cushions in a dry, ventilated area for 72-96 hours to reach optimal use condition.

Assembly Instructions

Packing Details

The product is packed in two boxes: Box 1/2 and Box 2/2.

Box 1/2 Contents:

• Part A (x1)
• Part B (x1)
• Part C (x1)
• Part D (x2 - Cushions)
• Part E (x2 - Cushions)
• Part F (x4 - Brackets)
• Part G (x2 - Plates)
• Part H (x2 - Leg Supports)
• Part I (x4 - Feet)
• Part J (x4 - Feet)

Box 2/2 Contents:

• Part K (x1)
• Part L (x1)
• Part M (x1)
• Part N (x1)
• Part O (x2 - Seat Panels)
• Part P (x2 - Connectors)
• Part Q (x1 - Central Support)
• Part R (x2 - Back Cushions)
• Part S (x2 - Seat Cushions)
• Hardware Kit

Hardware Included:

• M4x16mm screws: 4 pieces + 1 spare
• M6x18mm screws: 28 pieces + 1 spare
• M6x50mm screws: 10 pieces + 1 spare
• M6 Allen key: 1 piece

Assembly Steps:

Step 01: Attach Brackets to Support Bars

Attach two 'F' brackets to the ends of the 'K' support bar and the 'L' support bar, securing them with the 'G' plates. Use eight M6x18mm screws and two M6x50mm screws for this step.

Step 02: Attach Brackets to Support Bars

Attach two 'F' brackets to the ends of the 'M' support bar and the 'N' support bar, securing them with the 'G' plates. Use eight M6x18mm screws and two M6x50mm screws for this step.

Step 03: Connect Armrests to Frame

Attach the left armrest (Part A) and the right armrest (Part B) to the main frame assembly. Secure each armrest using four M6x18mm screws.

Step 04: Attach Central Support

Secure the central support bar (Part Q) to the underside of the sofa frame using four M6x18mm screws.

Step 05: Assemble Seat Base

Join the two seat base panels (Part O) together using the 'P' connectors. Secure each connection with four M6x50mm screws, totaling eight screws for this step.

Step 06: Place Back Panels

Position the two back panels (Part C) onto the sofa frame.

Step 07: Insert Back Panels

Slide the back panels (Part C) into their designated slots on the sofa frame.

Step 08: Attach Feet

Attach the four feet (Part J) to the bottom of the sofa. Each foot attaches via a leg support (Part H) and a central bracket (Part Q), secured with two M6x50mm screws per foot.

Step 09: Final Frame Assembly

The main sofa frame is now assembled.

Step 10: Place Cushions

Place the two back cushions (Part R) and the seat cushions (Parts S, D, and E) onto the sofa.

Assembly Complete!