PawHut D02-077 Dog Crate

Model: IN221000129V02_GL, D02-077_D02-077V00

Important Information

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.

This document contains assembly instructions and product details for the PawHut D02-077 Dog Crate. Please read all instructions before beginning assembly.

Assembly Mechanisms

Quickfit Connector

Description: Use the Quickfit connector to join panels. Tighten until the shoulder is flush with the panel. Do not overtighten or undertighten.

Diagram Description: Illustrates tightening a Quickfit connector until it is flush with the panel, with symbols indicating correct and incorrect (over/under tightened) states.

Cam Lock System

Description: The Cam Lock system secures panels together. Ensure the starting position of the cam lock is correct before inserting the connecting Quickfit. The Quickfit head should be in the center of the cam lock when panels are joined. The cam lock should be inserted before the Quickfit.

Operation: Turn the cam lock clockwise ? to tighten.

Diagram Description: Shows the correct orientation of the cam lock and Quickfit, and an illustration of turning the cam lock clockwise to tighten.

Parts List

Identifier	Description	Quantity	Dimensions (mm)
A	Side Panel	1	60055016
B	Top/Bottom Panel	1	60853816
C	Back/Front Panel	2	60852016
D	Side Panel	1	60055016
E	Front Panel with Door	1	60353416
F	Leg/Foot	4	N/A

Hardware List

Identifier	Description	Quantity	Notes
G	Cam Lock Housing	1	N/A
H	Hinge	1	N/A
I	Cam Lock Screw/Bolt	16	+1 spare
J	Screwdriver	1	N/A
K	Screw (M4*14)	24	+2 spare
L	Dowel/Pin	2	N/A

Assembly Steps

Follow these steps to assemble your PawHut D02-077 Dog Crate:

Step 01

Diagram Description: Shows panels A and D laid out flat. Four legs (F) are shown being attached to the underside of panels A and D using screws (K). The diagram indicates the correct orientation for attaching the legs.

Step 02

Diagram Description: Shows panel A and panel D being joined. Cam lock screws (I) are inserted into panel A, and cam locks (G) are shown being prepared for insertion into panel D. An arrow indicates joining panel D to panel A. A close-up shows the cam lock mechanism, with an arrow indicating insertion and a checkmark ✔️ for correct alignment.

Step 03

Diagram Description: Shows panel A with legs attached. Panel G (likely a support or internal divider) is shown being attached to panel A using cam lock screws (I) and cam locks (G). A close-up shows the cam lock mechanism being engaged.

Step 04

Diagram Description: Illustrates the assembly of the main crate structure. Panels A and D (with legs) are shown being connected to panel B (top/bottom). Multiple cam lock screws (I) and cam locks (G) are used. The diagram shows the structure taking shape, forming the base and sides.

Step 05

Diagram Description: Shows the crate structure from Step 04. Panel B (top/bottom) is being attached to the side panels. The diagram shows the base of the crate being secured, likely with cam lock screws (I) and cam locks (G). A close-up shows a cam lock screw being tightened into a panel.

Step 06

Diagram Description: Shows the crate structure with the base and sides assembled. Panel C (back panel) is shown being attached to the rear of the crate. Cam lock screws (I) and cam locks (G) are used for attachment.

Step 07

Diagram Description: Shows the crate structure with the back panel attached. Panel E (front panel with door) is shown being prepared for attachment. The hinge (H) is shown being attached to panel E and the main crate body using screws (K). The diagram indicates the door will be attached via hinges.

Step 08

Diagram Description: Shows the completed crate structure with the door attached. The latch mechanism is shown being attached to the door and the front panel using screws (K). A close-up details the attachment of the latch components.

Final Assembly

Diagram Description: A final view of the fully assembled PawHut D02-077 Dog Crate is presented, showing the completed structure with the door and latch.

Customer Support and Contact Information

If you have any questions or require assistance, please contact the appropriate customer care center for your region.

United States (US)

Phone: 001-877-644-9366

Email: customerservice@aosom.com

Importer: Aosom LLC, 27150 SW Kinsman Rd Wilsonville, OR 97070 USA. Made in China.

Canada (CA)

Phone: 416-792-6088

Email: customerservice@aosom.ca

Importer: Aosom Canada Inc., 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9. Made in China.

France (FR)

Phone: 0033-1-84166106

Email: aosom@mhfrance.fr

Importer/Manufacturer/REP: MH FRANCE, 2 Rue Maurice Hartmann, 92130 Issy Les Moulineaux, France. Fabriqué en Chine.

Germany (DE)

Phone: 0049-0(40)-88307530

Email: service@aosom.de

Importer/Manufacturer/REP: MH Handel GmbH, Wendenstraße 309, D-20537 Hamburg, Germany. In China hergestellt.

Italy (IT)

Phone: 0039-0249471447

Email: clienti@aosom.it

Importer/Manufacturer/REP: AOSOM Italy srl, Centro Direzionale Milanofiori, Strada 1 Palazzo F1, 20057 Assago (MI). Fatto in Cina.

Spain (ES)

Phone: 0034-931294512

Email: atencioncliente@aosom.es

Importer/Manufacturer/REP: SPANISH AOSOM, S.L., C/ROC GROS, N°15.08550, ELS HOSTALETS DE BALENYÀ, SPAIN. Hecho en China.

United Kingdom (UK)

Phone: 0044-800-240-4004

Email: enquiries@mhstar.co.uk

Importer Address: MH STAR UK LTD, Unit 27, Perivale Park, Horsenden lane South, Perivale, UB6 7RH. Made in China.

Portugal (PT)