This document provides assembly instructions for the PawHut D02-160V00 D02-160V01 pet house. Please read carefully before assembly.
Parts List
- Part A: Long Pole (x3)
- Part B: Long Pole (x2)
- Part C: Short Pole (x2)
- Part D: Curved Pole (x2)
- Part E: Angled Pole (x4)
- Part F: Corner Connector (x4)
- Part G: Base Fabric (x1)
- Part H: Base Mat (x1)
- Part I: Screw M8*50 (x6)
- Part J: Cover Fabric (x1)
- Part K: Storage Bag (x1)
Assembly Instructions
Step 1: Base Assembly
Attach the two Short Poles (Part C) to the Base Fabric (Part G). The short poles are inserted into designated sleeves on the edges of the base fabric.
Step 2: Frame Attachment
Attach four Corner Connectors (Part F) to the ends of the assembled base structure. These connectors will serve as attachment points for subsequent frame pieces.
Step 3: Side Frame
Attach the two Long Poles (Part B) to the structure, connecting between the corner connectors to extend the frame's width.
Step 4: Further Frame Connection
Attach additional Short Poles (Part C) and Corner Connectors (Part F) to further build the frame structure, creating the basic rectangular base.
Step 5: Securing Fabric
Secure the fabric components to the frame, likely using Velcro or similar fasteners. A hand is shown pressing down on a Velcro strip to ensure a secure fit.
Step 6: Base Frame Complete
The main base frame of the pet house, including the base fabric and mat, is now assembled.
Step 7: Roof Supports
Attach the four Angled Poles (Part E) and two Curved Poles (Part D) to the frame. These pieces form the supports for the roof structure, creating an arched shape.
Step 8: Roof Structure
Attach the three Long Poles (Part A) to the top of the frame and secure them with six Screws (Part I) to complete the roof frame.
Step 9: Cover Installation
Drape the Cover Fabric (Part J) over the assembled frame. An arrow indicates the direction of placement.
Final Assembly
The PawHut pet house is now fully assembled and ready for use. The completed pet house, with its cover installed, is shown from the front.
Customer Support
If you have any questions, please contact the customer care center for your region.
United States (US)
Phone: 001-877-644-9366
Email: customerservice@aosom.com
Imported by: Aosom LLC, 27150 SW Kinsman Rd Wilsonville, OR 97070 USA
Origin: MADE IN CHINA
Canada (CA)
Phone: 416-792-6088
Email: customerservice@aosom.ca
Imported by: Aosom Canada Inc., 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9
Origin: MADE IN CHINA
France (FR)
Phone: 0033-1-84166106
Email: aosom@mhfrance.fr
Imported by: MH France 2, rue Maurice Hartmann 92130 Issy-les-Moulineaux
Origin: Fabriqué en Chine
Spain (ES)
Phone: 0034-931294512
Email: atencioncliente@aosom.es
Importer: SPANISH AOSOM, S.L., C/ ROC GROS, N° 15. 08550, ELS HOSTALETS DE BALENYÀ, SPAIN.
Origin: HECHO EN CHINA
Portugal (PT)
Phone: 0034-931294512 (SEG-SEX DAS 7:30H ÀS 16:30H)
Email: info@aosom.pt
Importer: SPANISH AOSOM, S.L, C.ROC GROS N.15, 08550. ELS HOSTALETS DE BALENYÀ
Origin: WWW.AOSOM.PT
Germany (DE)
Phone: 0049-0(40)-88307530
Email: service@aosom.de
Importer Address: MH Handel GmbH, Wendenstraße 309, D-20537 Hamburg, Germany
Origin: IN CHINA HERGESTELLT
United Kingdom (UK)
Phone: 0044-800-240-4004
Email: enquiries@mhstar.co.uk
Importer Address: MH STAR UK LTD, Unit 27, Perivale Park, Horsenden lane South, Perivale, UB6 7RH
Origin: MADE IN CHINA
Italy (IT)
Phone: 0039-0249471447
Email: clienti@aosom.it
Imported by: AOSOM Italy srl, Centro Direzionale Milanofiori, Strada 1 Palazzo F1, 20057 Assago (MI)
Origin: FATTO IN CINA
Recycling Information
Please dispose of this product responsibly. Information on disposal and recycling is available at quefairedemesdechets.fr.
The following symbols are present: ♻️ (Recycle), ? (Association), ? (Delivery/Logistics), ?️ (Waste Disposal Facility).
