Resistex Miks LED Luminaire

Options / Accessories

Orientable / Adjustable

1. Description of step 1: Shows the fixture and a separate ring for orientation adjustment.
2. Description of step 2: Illustrates attaching the ring to the fixture.
3. Description of step 3: Shows rotating the fixture within its housing to adjust the angle.

Basse Luminance / Low Light

1. Description of step 1: Shows the fixture and a separate component, likely a diffuser or reflector, for low luminance.
2. Description of step 2: Illustrates attaching this component to the fixture.
3. Description of step 3: Shows the final assembly for low luminance configuration.

Installation Steps

1. Step 1: Ceiling Cutout - Prepare a circular opening in the ceiling with a diameter of Ø69 mm (+/-1 mm). The fixture's outer diameter is also indicated as Ø69 mm.
2. Step 2: Insert Fixture - Carefully insert the fixture into the prepared ceiling opening.
3. Step 3: Wire Connection (Initial) - Bring the power cable towards the fixture's terminal block.
4. Step 4: Terminal Block Details - Open the terminal block. Connect the Live wire to the 'L' terminal and the Neutral wire to the 'N' terminal. Ensure proper connection and close the block.
5. Step 5: Mains Connection - Connect the fixture's wiring to the mains power supply, identifying Live (L) and Neutral (N) conductors.
6. Step 6: Secure Fixture - Ensure the fixture is securely fastened in the ceiling, likely using integrated spring-loaded clips that engage with the ceiling material.
7. Step 7: Final Check - Verify all electrical connections are secure and the fixture is properly seated in the ceiling.
8. Step 8: Final Installation - The fixture is now installed and flush with the ceiling.

Consignes de sécurité / Safety Notes

• Never work on the luminaire when it is live (under voltage).
• Installation must be performed by a professional installer, adhering to electrical installation standards and regulations.
• Beware of electrostatic discharges (ESD Norm). Handle with necessary precautions.
• Observe all instructions and mounting steps provided.

Entretien / Maintenance Instructions

• Do not use chemical or abrasive products to clean the fixture.
• Keep these instructions for future dismantling or maintenance work.
• Additional information on RESISTEX luminaires is available at the website www.resistex-sa.com.
• RESISTEX cannot be held responsible for any misuse of the product.