SKORE

Installation and Safety Instructions

Safety Notes

• Never work when voltage is present on the luminaire.
• Installation must be performed by a professional installer in compliance with electrical installation standards and regulations.
• Risk of electrostatic discharges (ESD Norm). Handle with necessary precautions.
• Please observe the notes and mounting steps described.

Maintenance Instructions

• Do not use chemicals or abrasive products to clean the fixture.
• Keep these instructions for removal or subsequent maintenance. Additional information about RESISTEX luminaires is available on the website www.resistex-sa.com.
• RESISTEX cannot be held responsible for any misuse of the product.

Mounting and Installation

The SKORE luminaire requires professional installation. Follow these steps carefully:

Installation Steps

1. Step 1 (01): Attach suspension elements using 4 screws to the ceiling or mounting surface.
2. Step 2 (02): Mount the luminaire body. Attach the luminaire to the suspension elements using 4 screws.
3. Step 3 (03): Connect the wiring. Ensure power is OFF.
   • Power: Connect mains supply wires (L1, L2, L3, N, E) to the corresponding terminals.
   • DALI Control: Connect DALI control wires to the 'DA' terminals.
   • Dimmable Control: Connect dimming control wires to the 'Dim+' and 'Dim-' terminals.
   • Wire Gauge: Use wires with a cross-section of 1.5-2.5 mm².
   • Max Cable Length: Maximum recommended cable length for control signals is 12 meters.
4. Step 4 (04): Secure the cover. Close the luminaire cover and fasten with 2 screws.
5. Step 5 (05): Adjust the angle. The luminaire offers adjustable angles. Refer to the diagram for specific settings (e.g., 15°, 30°, 45°, 60°) and their corresponding values.
6. Step 6 (06): Final placement. Ensure the luminaire is securely mounted.
7. Step 7 (07): Final wiring check. Verify all connections are secure before powering on.

Diagram Descriptions

Suspension and Angle Adjustment Diagram: This diagram illustrates the suspension system and how the luminaire is attached. It highlights the adjustable angle mechanism, showing different tilt settings (15°, 30°, 45°, 60°) and their associated adjustment values.

Wiring Terminal Block Diagram: This diagram details the internal wiring connections. It shows terminals for mains power (L1, L2, L3, N, E) and control signals (DA for DALI, Dim+ and Dim- for dimming). It specifies wire gauge (1.5-2.5 mm²) and maximum control cable length (12 meters).

Product Features and Specifications

• Product Name: SKORE
• Brand: Resistex
• LED: Integrated, replaceable by a professional.
• Driver: Replaceable by a professional.
• Angle Adjustment: Yes, multiple settings available.
• Ingress Protection: IP20
• Impact Resistance: IK10
• Warranty: 5 Years
• Certifications: RoHS, CE
• Voltage: 230V
• Control Compatibility: DALI, Dimmable