Resistex Saline Outdoor Luminaire

Product Overview

The Resistex Saline is an outdoor lighting fixture designed for reliable illumination. This guide provides essential information for its safe and correct installation.

Dimensions

Safety and Maintenance Instructions

Safety Notes

• ⚠️ Never work on the luminaire when it is live (voltage present).
• The installation must be performed by a qualified professional installer, adhering to all relevant electrical installation standards and regulations.
• Be aware of the risk of electrostatic discharges (ESD Norm). Handle the components with appropriate precautions.
• Please observe all instructions and follow the steps described in the mounting instructions carefully.

Maintenance Instructions

• Do not use chemical or abrasive products to clean the fixture.
• Keep these instructions for future reference, including dismantling or subsequent maintenance work.
• Additional information about RESISTEX luminaires can be found on the website: https://www.resistex-sa.com.
• RESISTEX cannot be held responsible for any misuse of the product.

Certifications and Standards

Installation Steps

Follow these steps for a correct installation:

1. Step 1: Attach the base plate using 6 screws [screws].
2. Step 2: Assemble the main pole section.
3. Step 3: Prepare the mounting surface. Dimensions for reference: 170 mm, 101 mm, Ø7 mm.
4. Step 4: Secure the base to the mounting surface using 3 anchors (Ø14).
5. Step 5: Connect electrical wiring within the base using the provided terminal block.
6. Step 6: Attach the main pole to the secured base.
7. Step 7: Secure the pole to the base using 3 screws (Ø8, Ø6).
8. Step 8: Wire the luminaire, ensuring correct connection for the ON/OFF function via the terminal block.
9. Step 9: Attach the luminaire head to the pole using 3 screws.
10. Step 10: Secure the diffuser or lens to the luminaire head using 4 screws.
11. Step 11: Final assembly complete. Ensure all connections are secure before powering on.

Company Information