Kreafunk reCHARGE

Assembly

Assemble the reCHARGE correctly before using the product.

Note: do not re-assemble.

Charging

Connect the reCHARGE to power using the included USB-C cable. The indicator light will blink when connected (2x Flashing).

Input power: DC 5V / 2A or 9V / 2A.

Usage

Place your device on the reCHARGE to start charging.

Use the holder to place your device in the desired way.

Technical Specifications

• 100% recycled GRS plastic
• Dimensions: 116*65*64 mm
• Weight: 80g
• USB cable included
• Standard: Qi
• Compatible with Qi enabled devices
• Horizontal and vertical charging
• Output power: 15 W
• Charging efficiency: ≥72%
• Charging distance: ≤8 mm
• Input power: DC 5V / 2A - 9V / 2A

Safety and Maintenance Instructions

• Please read this operation manual carefully before use.
• Keep the product away from heat sources.
• Place reCHARGE in a stable position to avoid falls and damage.
• Do not expose the product to direct sunlight for long periods.
• Do not expose the product to extreme cold.
• Rechargeable batteries have a limited number of charge cycles.
• Avoid liquids getting into the product.
• Do not throw or stamp on the product.
• Do not try to disassemble the product; this must only be done by a professional.
• Do not use concentrated chemical products or detergent to clean the product.
• Keep the surface away from sharp things.
• Use 5V / 1A or 5V / 2A power supplies only. Connecting higher voltage supplies may cause damage.
• Do not discard lithium battery near fire or intense heat.

Precautions and Care

• Use and store the product at temperatures between -20°C and 40°C, with humidity below 85%.
• Do not place the product in high-temperature environments during charging to avoid overheating.
• Keep the product in a dry place. Avoid wet or dirty conditions.
• Never throw the product into fire.
• Do not throw or drop the product to prevent damage or malfunction.
• Do not place anything between the mobile device and the charging pad.
• Keep away from high voltage devices (highest 5V).
• Keep away from magnetic stripe cards or chip cards to avoid magnetic failure.
• Maintain a distance of at least 20 cm from implantable medical devices (pacemakers, etc.) to avoid interference.
• If cleaning, ensure the charger is not connected to the AC adapter.
• Do not place heavy objects on the product.
• This product is not a toy; keep away from children.