Kreafunk wiCHARGE 2 Qi Wireless Charger

Overview

The Kreafunk wiCHARGE 2 is a Qi wireless charger designed for convenient and efficient charging of compatible devices. This stylish product is made from 100% recycled plastic.

Technical Specifications

Product Description and Usage

The wiCHARGE 2 is a circular wireless charging pad designed for Qi-compatible devices. It features a sleek, modern design and is constructed from 100% recycled plastic.

Key Features:

• Wireless Charging: Supports Qi wireless charging with an output power of up to 15W.
• Input Port: Equipped with a USB-C port for power input.
• Input Specification: The charger is designed for DC 5V / 1A input. While it supports up to 9V / 1.8A, it is strongly recommended to use only 5V / 1A power supplies to prevent potential damage.
• Charging Indicator: An LED indicator light is present. It will flash twice (2x Flashing) to signal that the device is charging.
• Charging Distance: Optimal charging occurs within a distance of ≤8 mm.

To use, simply connect the wiCHARGE 2 to a power source via the USB-C cable and place your Qi-enabled device onto the center of the pad.

Safety and Maintenance Instructions

• Read Manual: Please read this operation manual carefully before use. Retain for future reference.
• Heat Sources: Keep the product away from radiators, heaters, or other heat-producing appliances.
• Stability: Place the product on a stable surface to prevent falls and potential damage or injury.
• Environmental Conditions:
  • Temperature: Use and store between -20°C and 40°C.
  • Humidity: Keep humidity below 85%.
  • Sunlight: Avoid prolonged exposure to direct sunlight, as high temperatures can shorten product life and damage components.
  • Cold: Avoid extreme cold, which can damage the internal circuit board.
  • Moisture: Keep the product in a dry place. Do not use or store in wet or dirty conditions. Avoid liquids getting into the product.
• Handling:
  • Do not throw, stamp on, drop, or place heavy objects on the product.
  • Do not attempt to disassemble or modify the product. Service should only be performed by a professional.
• Cleaning: Clean only with a dry cloth when the charger is unplugged from the power source. Do not use concentrated chemical products or detergents.
• Power Supply: Use only 5V / 1A power supplies. Connecting higher voltage supplies may cause severe damage.
• Sharp Objects: Keep the surface away from sharp objects to prevent damage to plastic parts.
• Magnetic Interference: Keep the product away from magnetic stripe cards or chip cards (credit cards, ID cards, etc.) to avoid magnetic failure.
• Medical Devices: Maintain a distance of at least 20 cm (approx. 8 inches) between the product and implantable medical devices (e.g., pacemakers, cochlear implants) to prevent potential interference.
• Battery Safety: Rechargeable batteries have a limited lifespan. Do not discard lithium batteries near fire or intense heat to avoid explosion risk.
• Product Use: This product is not a toy. Keep away from children.
• Local Regulations: Be aware of and comply with local laws regarding the minimum age for using chargers.
• Troubleshooting: If the device becomes excessively hot, emits odor, is deformed, abraded, cut, or exhibits any abnormal phenomenon, immediately stop use and contact the manufacturer.
• Customer Support: If you experience any problems, contact the retailer where you purchased the product. If the retailer cannot resolve the issue, they will handle the claim directly with Kreafunk.

Compliance and Recycling

This product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at: https://Kreafunk.com/pages/declaration-of-conformity

The product is made from 100% recycled plastic and includes recycling symbols for paper (PAP) and plastic (LDPE), indicating responsible disposal.

Contact Information

Kreafunk ApS
Klamsagervej 35A, st.
8230 Aabyhoej
Denmark
Website: www.Kreafunk.com
Email: info@Kreafunk.dk
Phone: +45 96 99 00 20