Kreafunk aDAPT Wall Charger
User Manual
Overview
The Kreafunk aDAPT is a wall charger designed for convenient power delivery. It features both USB-C and USB-A ports, allowing you to charge multiple devices simultaneously.
Diagram Description: The charger is depicted as a compact white unit with a standard European plug. It has a USB-C port located on the top and a USB-A port on the front. The Kreafunk logo is visible on the side of the device.
Technical Specifications
- Material: 100% recycled GRS plastic
- Ports: USB Type-A and USB Type-C
- Total Output: 20W
- Dimensions: 32 x 32 x 33 mm
- Weight: 50g
- Plug Type: EU
- Input: 100-240V, AC 0.5A 50/60Hz
- USB-C Output: 5V/3A, 9V/2.22A, 12V/1.67A (20W max)
- USB-A Output: 5V/3A, 9V/2A, 12V/1.5A (18W max)
Note: The aDAPT charger provides both USB-C and USB-A outputs. Some devices may not support USB-C to USB-C charging, so please verify your device's compatibility with USB-A or USB-C output.
Safety and Maintenance Instructions
To ensure safe and optimal use of your Kreafunk aDAPT wall charger, please follow these guidelines:
- Read this user manual carefully before use and keep it for future reference.
- Keep the product away from heat sources such as radiators, heaters, or other heat-producing appliances.
- Place the charger on a stable surface to prevent falls and potential damage or injury.
- Do not expose the product to direct sunlight for extended periods. High temperatures can shorten its lifespan and deform plastic parts.
- Avoid exposing the product to extreme cold, as this may damage the internal circuit board.
- The operating temperature range for the aDAPT is -20°C to 60°C.
- Do not leave the charger in your car, especially in direct sunlight.
- Prevent liquids from entering the product.
- Before cleaning with a dry cloth, ensure the charger is switched off and unplugged from the power outlet.
- Do not throw, stamp on, or apply excessive pressure to the product, as this may damage the internal circuit board.
- Do not attempt to disassemble the product; this should only be done by a qualified professional.
- Do not use concentrated chemical products or detergents for cleaning.
- Keep the surface away from sharp objects that could damage plastic components.
- Use only 5V/3A power supplies. Connecting power supplies with higher voltage may cause severe damage.
Troubleshooting: If you encounter any issues with your product, please contact the retailer where you purchased it. The retailer will offer guidance, and if the problem persists, they will handle the claim directly with Kreafunk.
Compliance and Recycling
This product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at: https://Kreafunk.com/pages/declaration-of-conformity.
The product is made from recycled materials.
Various compliance and recycling certifications are indicated, including CE, RoHS, LDPE, PAP, Global Recycled Standard, and FSC logos.
Contact Information
Kreafunk ApS
Karupvej 6
8000 Aarhus C
Denmark
Website: www.Kreafunk.com
Email: info@Kreafunk.dk
Phone: +45 96 99 00 20
