Product Overview
The toCHARGE Qi is a wireless charger designed for convenient power delivery. It is made from 100% recycled GRS plastic. For detailed compliance information, please refer to the Declaration of Conformity.
Product Features
The toCHARGE Qi features a USB-C port for input and supports 15W wireless output. It is compatible with Qi-enabled devices and has a magnetic attachment function for compatible iPhones.
Device Ports: USB-C input, 5V/2A
Wireless Output: 15W
Charging the toCHARGE Qi
Use the included USB-C cable to charge the toCHARGE Qi. The charging indicator will flash blue while charging. When fully charged, all 4 LEDs will be lit.
Battery Status
The battery indicator shows the remaining power:
- Charging: The indicator flashes blue.
- Fully Charged: All 4 LEDs light up.
Note: Specific LED indicators for different charge levels (e.g., 0-10%, 25%, 50%, 75%, 100%) are visually represented in the manual but not explicitly detailed in text for each level beyond charging and full charge states.
Powering On and Off
- To turn on: Press the Power button once.
- To turn off: Hold the Power button for 3 seconds.
The toCHARGE Qi will also turn off automatically after a period of inactivity.
Using the Wireless Charger
Simply place your Qi-enabled device on the toCHARGE Qi to start charging. The battery indicator lights up green when charging is in progress.
Using with USB-C
The toCHARGE Qi can also be used when connected via USB-C.
Technical Specifications
- Material: 100% recycled GRS plastic
- Dimensions: 104x64x11 mm
- Weight: 110g
- Battery Capacity: 5000mAh 19Wh
- Standard: Qi
- Compatibility: Qi-enabled devices
- Output Power: Up to 15W
- Features: Magnetic attachment for compatible iPhones, Anti-slip material
- Charging Time: 2-3 hours
- Included: USB-C cable
- Charging Efficiency: ≥72%
- Charging Distance: ≤8 mm
- Input Power: 5V / 2.4A - 9V/2A - 12V/1.5A
Safety and Maintenance Instructions
Please read this operation manual carefully before use. Retain these instructions for future reference and follow them at all times.
- Keep the product away from heat sources (radiators, heaters, etc.).
- Place the product in a stable position to prevent falls and potential injury.
- Do not expose the product to direct sunlight for extended periods. High temperatures can shorten product life, damage the battery, and deform plastic parts.
- Avoid exposure to extreme cold, as it may damage the internal circuit board.
- Keep the product away from liquids.
- Do not throw, stamp on, or drop the product, as this may damage the internal circuit board.
- Do not attempt to disassemble the product. Service should only be performed by a professional.
- Do not use concentrated chemical products or detergents for cleaning.
- Keep surfaces away from sharp objects that could damage plastic parts.
- Use only 5V/1A power supplies. Using higher voltage power supplies may cause severe damage.
- Do not discard or place the lithium battery near fire or intense heat to avoid explosion risk.
- Keep the product away from children. It is not a toy.
- If you experience any problems, contact the retailer where you purchased the product.
- If the device becomes excessively hot, emits odor, is deformed, abraded, cut, or exhibits abnormal phenomena, stop use immediately and contact the manufacturer.
Precautions and Care
- Use and store the product at temperatures between -20°C and 40°C, with humidity below 85%.
- Avoid placing the product in high-temperature environments during charging to prevent overheating and damage.
- Store the product in a dry place. Do not place or use it in wet or dirty conditions.
- Never throw the product into fire.
- Never throw or drop the product, as this can cause damage and malfunction.
- Do not place anything between the mobile device being charged and the charging pad.
- Never attempt to modify or disassemble the product. Contact your seller for assistance if problems arise.
- This product is not suitable for use as a travel adapter.
- Keep away from high voltage devices (maximum 5V).
- Keep the product away from magnetic stripe cards or chip cards (credit cards, ID cards, etc.) to avoid magnetic failure.
- Maintain a distance of at least 20 cm between the product and implantable medical devices (pacemakers, cochlear implants, etc.) to avoid potential interference.
- When cleaning the charger, ensure it is not connected to the AC adapter.
- Do not place heavy objects on the product.
- Check local laws regarding the minimum age for operating chargers.
