Ellie: Lamp with Wireless Charger and Bluetooth Speaker
User Manual
Product Overview
The Ellie is a versatile lamp that combines wireless charging for your phone and a Bluetooth speaker. It features adjustable light settings and is designed for modern use.
Key features include:
- Wireless charging capability (⚡ 10W)
- Bluetooth speaker for audio playback
- Adjustable lamp with 3 light settings
- Power input via ? USB-C (9V/2A)
- Made from ♻️ recycled materials
Getting Started
To start using your Ellie lamp, simply connect it to a power source using the included ? USB-C cable. The Ellie lamp does not have an internal battery and must always be connected to power to operate.
Charging Your Phone
Ellie can charge your phone wirelessly. Simply place your Qi-enabled smartphone on the charging stand to begin charging.
Light Modes
To change the light mode, simply press the ? light icon located on the lamp's base.
Dimming the Light
To adjust the brightness (dim the light), press and hold the ? light icon on the lamp's base.
Bluetooth Connectivity
Manual Pairing
Step 1: To manually connect to Bluetooth, press and hold the ? Bluetooth button for 2 seconds.
Step 2: On your device (e.g., smartphone or tablet), go to the Bluetooth settings. Find "Ellie" in the list of available devices and select it to connect.
Audio Playback and Calls
Audio Control
Press the ? Bluetooth button once to play or pause your audio.
Call Management
Answer/End Call: Press the ? Bluetooth button once.
Reject Call: Press and hold the ? Bluetooth button for 2 seconds.
Technical Specifications
- Material: 100% recycled GRS plastic
- Water-resistant: IPX4
- Dimensions: 120mm x 120mm x 320mm
- Weight: 375g
- Wireless Charging Standard: Qi
- Compatibility: Qi enabled devices
- Qi Output Power: 10W
- Charging Efficiency: ≥72%
- Charging Distance: ≤5 mm
- Speaker: Ø45mm, 4Ω, 3W
- Lamp Settings: 3 light settings
- Microphone: Built-in
- Bluetooth Version: 5.1
- Bluetooth Range: Up to 10m
- Input Power: DC 9V / 2A
- Frequency Band: 2402-2480 MHz
- Maximal Radio Frequency Effect: <3 dBm
- Included: USB-C cable
- Note: Power adapter is not included. Kreafunk suggests using a 20W adapter for optimal performance, especially when charging a phone.
Safety and Maintenance
Please read this operation manual carefully before use. Retain these instructions for future reference.
General Precautions:
- Keep the product away from heat sources (radiators, heaters) and direct sunlight.
- Place the lamp on a stable surface to prevent falls and damage.
- Avoid exposing the product to extreme temperatures (both hot and cold) or liquids.
- Do not throw, stamp on, or drop the product, as this may cause damage or malfunction.
- Keep the product clean and dry. Avoid using it in wet or dirty conditions.
- Do not place anything between the mobile device and the charging pad.
- Never attempt to alter or disassemble the product.
- Keep away from high voltage devices (maximum 9V).
- Keep away from magnetic stripe cards or chip cards to avoid magnetic failure.
- Maintain a distance of at least 20 cm from implantable medical devices (e.g., pacemakers) to prevent potential interference.
- When cleaning, ensure the product is not connected to a power source.
- Do not place heavy objects on the product.
- This product is not a toy; keep it away from children.
- Use only 9V / 2A power supplies. Using higher voltage adapters may cause severe damage.
- If you experience any problems, contact the retailer where you purchased the product.
Operating and Storage Conditions:
- Operating and storage temperature: -20°C to 40°C.
- Humidity: Less than 85%.
- Do not charge in high-temperature environments to avoid overheating.
Cleaning:
- Before cleaning with a dry cloth, turn off the power switch and unplug the power cord.
- Do not use concentrated chemical products or detergents.
- Keep surfaces away from sharp objects.
Compliance Information
This product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
The declaration of conformity may be consulted at: https://Kreafunk.com/pages/declaration-of-conformity
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: 2ACVC-ELLIE
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Contact Information
Kreafunk ApS
Karupvej 6
8000 Aarhus C
Denmark
Website: www.Kreafunk.com
Email: info@Kreafunk.dk
Phone: +45 96 99 00 20
