User Manual

Product Information

A line drawing depicts the Techage Dummy Camera with Solar Powered Flood Light. The unit features a solar panel mounted on an adjustable bracket above a camera housing. The camera has multiple LED lights, a PIR motion sensor, a red LED indicator, and a dummy antenna. Below the unit are three key feature icons: ? IP66 Waterproof ? Motion Detection ☀️ Solar Power

The following components are identified:

• 1. Solar Panel
• 2. Dummy Antenna
• 3. 8 pcs LED Lights
• 4. PIR Motion Sensor
• 5. Red LED Light
• 6. Power Button

Test the Lights

Before drilling holes and installing the lights on the wall, perform the following tests:

1. Press and hold the power button for 3 seconds to turn on the lights. The power button is located on the back of the solar panel.

   Diagram Description: A hand is shown pressing a button on the back of the solar panel unit.

2. Fully cover the solar panel by placing the solar light upside down on a table.

   Diagram Description: The solar light unit is depicted upside down on a flat surface, with the camera facing upwards.

3. Observe the unit. If it is working correctly, a red light should be visible.

   Diagram Description: A sequence showing: 1. The solar light unit. 2. A hand waving in front of the light. 3. The light unit emitting beams of light, indicating motion detection.

   Wave your hand in front of the light. The light will detect your movement and turn on.
4. If no red light is observed, place the lights under direct sunlight for at least 2 hours (or 4 hours if it's cloudy or snowy) to charge the battery.

   Diagram Description: The solar panel unit is shown under a sun symbol, with text indicating "2 HOURS" of charging.

IMPORTANT: Do not aim the lights towards people or yourself when testing. Looking directly at the lights from a very short distance may cause eye discomfort. ?️?

Optimal Installation Position

Diagram Description: A wall is shown with a bracket mounted on it, holding the solar light unit. A dotted line illustrates the optimal detection range. Text indicates "Optimal Installation Height: ~10ft" and "Optimal Detection Range: ~20ft".

Please ensure the chosen position for your solar lights receives sufficient sunshine. The optimal solar recharging time is 4 to 6 hours every day to guarantee the best performance at night or during adverse weather conditions.

Technical Data

Warranty Information

Techage is committed to providing the best products and services. All Techage products come with a One-Year Quality Warranty. For any questions or issues encountered while using the products, please contact Techage's professional customer service team for assistance.

Customer Service E-mail: support@techage.com

Compliance Marks: ?? CE ❗ ♻️