Techage CG6X Battery Camera User Manual
This manual provides essential information for the installation, operation, and maintenance of the Techage CG6X Battery Camera.
Product Overview
The Techage CG6X is a wireless, solar-powered battery camera designed for home security. It offers high-definition video recording, intelligent motion detection, two-way audio communication, and remote access via a dedicated mobile application.
Key Features
- High-Definition Video: Crystal clear video quality for monitoring.
- Solar-Powered: Continuous power supply via an integrated solar panel, reducing the need for frequent charging.
- Wireless Connectivity: Connects to your Wi-Fi network for easy setup and remote access.
- Motion Detection: Advanced sensors detect movement and send real-time alerts to your mobile device.
- Two-Way Audio: Built-in microphone and speaker allow for communication with visitors or deterring intruders.
- Mobile App Control: Manage camera settings, view live feeds, and access recordings through the Techage app.
- Weatherproof Design: Suitable for outdoor installation, resistant to various weather conditions. [sun emoji] ☀️
Installation Guide
Follow these steps for a successful installation:
- Mounting the Camera:
Choose a suitable location with good Wi-Fi signal and optimal sunlight exposure for the solar panel. Use the provided mounting bracket and screws to securely attach the camera to a wall or surface. The bracket allows for angle adjustment. [wrench emoji] ?
- Connecting the Solar Panel:
Connect the solar panel to the camera using the provided cable. Ensure the panel is positioned to receive direct sunlight throughout the day.
- Powering On:
Insert the battery if not pre-installed. The camera will power on automatically when connected to the solar panel or a power source.
- App Setup:
Download the Techage mobile app from your device's app store (iOS or Android). Follow the in-app instructions to create an account and add your CG6X camera by scanning a QR code displayed on the camera or within the app. [mobile phone emoji] ?
- Wi-Fi Connection:
During the app setup, connect the camera to your 2.4GHz Wi-Fi network. Ensure you have your Wi-Fi password ready.
Operation
Once installed and connected, you can operate the camera via the Techage mobile app:
- Live View: Access the live video stream from your camera at any time.
- Playback: Review recorded footage stored on the SD card or cloud (if subscribed).
- Motion Alerts: Receive push notifications on your phone when motion is detected.
- Two-Way Talk: Tap the microphone icon in the app to speak through the camera's speaker.
- Settings: Adjust motion detection sensitivity, recording schedules, and other preferences. [gear emoji] ⚙️
Specifications
| Feature | Specification |
|---|---|
| Model | CG6X |
| Resolution | 1080p Full HD |
| Power Source | Rechargeable Battery & Solar Panel |
| Connectivity | Wi-Fi 2.4GHz |
| Audio | Two-Way Audio |
| Storage | MicroSD Card (up to 128GB) / Cloud Storage |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Waterproof Rating | IP65 |
Troubleshooting
- Camera Offline: Check Wi-Fi connection, router status, and camera power. Ensure the camera is within Wi-Fi range.
- No Motion Detection Alerts: Verify motion detection is enabled in the app settings, check sensitivity levels, and ensure the lens is clean.
- Battery Not Charging: Confirm the solar panel is clean and receiving direct sunlight. Check the connection between the panel and the camera.
- Poor Video Quality: Ensure a stable Wi-Fi connection. Clean the camera lens.
Support
For further assistance, FAQs, and firmware updates, please visit the official Techage website.
https://www.techage.com [globe emoji] ?
