Giant Recon Plus TL150 Bike Light
Model: RECON PLUS TL150
Lumens: 150
Important Safety Information
WARNING:
- Do not look directly into the light beam as it can cause eye damage and other injuries. Use with care.
- Direct the light beam downwards to avoid dazzling oncoming traffic and pedestrians.
- Avoid using high beams in urban areas. Use high beams only on suburban roads and highways with low traffic.
- Ensure the light is securely mounted and functional before use. Avoid obstruction of the light beam by luggage or other items.
- Keep the product away from children.
- Carry a spare light or battery pack as the light may fail unexpectedly.
- The product is IPX6 rated for normal use in rain but should not be intentionally submerged in water.
- Charge the battery before use. Refer to the 'How to Charge' section for instructions.
Product Components
- Light Unit
- Mounting Bracket
- USB-C Charging Cable
Bike Light Operation
Power Button
- Power ON/OFF: Press and hold the power button for 1 second. The light features a memory function that returns to the last used mode when turned on again.
Light Modes:
- HIGH STEADY
- LOW STEADY
- HIGH FLASH
- RANDOM FLASH
- LOW FLASH
Battery Indicator
When the device is off, press the power button once to display the battery level for 3 seconds before turning off.
- Constant green: 100%-70%
- Constant yellow: 70%-40%
- Constant red: 40%-10%
- Flashing red: 10%-1% (Device entering low power mode)
Lock Mode
To lock the device: When the device is off, press and hold the power button for 5 seconds. The red battery indicator will flash 3 times to confirm the device is locked. In lock mode, the power and Bluetooth buttons will not function.
Unlock
To unlock the device: When in lock mode, press and hold the power button for 5 seconds. The red battery indicator will flash 3 times.
Group Riding Button
Group Riding Function ON/OFF
When the device is on, press and hold the side button for 1 second. The side indicator will turn blue when the group riding function is enabled.
Group Riding Mode
When enabled, all Recon Plus TL300/TL150 series lights within 20 meters will automatically enter group riding mode, operating at a brightness of 5 lumens.
Pairing
Connect to ANT+ Device
Shake the tail light to activate ANT+. Use your ANT+ device to search and pair the tail light. Once connected, you can control the light via the ANT+ device. The purple light will remain on when connected.
Runtime
| Mode | HIGH STEADY | LOW STEADY | HIGH FLASH | LOW FLASH | RANDOM FLASH | GROUP RIDE |
|---|---|---|---|---|---|---|
| Lumens | 70 Lumens | 20 Lumens | 150 Lumens | 15 Lumens | 20 Lumens | 5 Lumens |
| Runtime | 2.5 hrs | 8 hrs | 7 hrs | 35 hrs | 30 hrs | 25 hrs |
How to Charge
Please charge before use.
Connect the USB-C cable to the charging port. Charging takes approximately 2 hours (0.6A).
- Charging: Flashing green light
- Charging complete: Constant green light
Installation
- Select the appropriate mounting bracket for your handlebar.
- Attach the light to the bracket by sliding it in until it clicks securely.
