Tribesigns Computer Desk Assembly Instructions

Important Precautions for Furniture Assembly

Secure Sufficient Workspace

Ensure you have ample space not only for the furniture itself but also for unpacking parts and maneuvering around the assembly area. It is recommended to have at least double the footprint of the furniture available.

Partial Screw Tightening

When attaching multiple screws to a single part, it is best to loosely tighten all screws by hand first, then gradually tighten them with a tool.

Using Electric Screwdrivers

While electric screwdrivers can speed up assembly, use them with caution. High-powered drivers can potentially damage screw holes or the wooden parts if over-tightened.

Assembly Steps and Methods

Follow the provided assembly steps and methods precisely. Incorrect assembly can lead to injury or damage to the product.

Parts List

Please check the quantity of parts before assembly.

• Part 1: 1 pc
• Part 2: 1 pc
• Part 3: 1 pc
• Part 4: 1 pc

Fitting Parts List

Assembly Steps

Step 1

Lightly tighten screws to about 70%.

Part 1 is attached to the frame using screws (A). Ensure 4 screws are used.

Step 2

Securely tighten all screws one by one to 100%.

Attach the frame (Parts 2, 3, 4) to the base using screws (A) and (B). Ensure 12 screws (A) and 4 screws (B) are used.

Step 3

The assembly is now complete.

Safety Precautions

• Do not stack items for storage; they may fall and cause injury.
• Avoid placing heavy objects off-center on the furniture; it may tip over and cause injury.
• Do not place the furniture near fire sources; this may cause damage.
• Do not exceed the weight limit; this may cause damage.
• Do not use the product with loose screws; this may cause damage or tipping.
• If you notice any abnormalities, stop using the product and consult the seller. This may cause damage or tipping.
• Do not stand or sit on the product; it may tip over and cause injury.
• Do not use the product for purposes other than its intended use; this may lead to unexpected accidents.
• Do not disassemble or modify the product; this may cause damage or injury.
• Place the product on a flat, level surface.
• Do not move the product while loaded; this may cause damage or injury.
• For safety reasons, specifications may change without prior notice due to structural improvements.
• Ignoring these warnings and mishandling the product may result in death, serious injury, or property damage.
• When moving the product, two or more people should do it slowly. Uneven surfaces may cause damage.
• Be careful not to get your fingers caught in moving parts.

Usage Precautions

• Avoid direct sunlight and high temperatures from heating appliances; this may cause discoloration or deformation.
• Do not place in humid environments; this may cause corrosion, discoloration, or deformation.
• Do not drop or hit hard objects on the surface; this may cause damage.
• Do not place hot pots or kettles directly on the surface.
• Avoid using the product outdoors or in wet areas; this may cause discoloration or deformation.
• If water is spilled, wipe it up immediately without leaving it.
• The casters have a lock function. Release the lock when moving the furniture.
• Always lock the casters when in use.
• Do not allow children to operate or move the furniture; this may cause damage or injury.

Care Instructions

• Do not use benzine, thinner, alcohol, or chemical cloths, as they may damage the surface finish.
• When the surface is wet, wipe it with a soft, dry cloth.
• If the tabletop becomes significantly dirty, dampen a soft cloth with diluted neutral detergent, wring it out well, and wipe the dirty area. Then, wipe thoroughly with a soft, dry cloth.
• When using commercial cleaners, test on an inconspicuous area first to check for discoloration.

For returns or exchanges due to defective products, please contact us at the following:

Contact Email: Service-JP@Tribesigns.com

Homepage URL: www.tribesigns.com

Follow Tribesigns on:

• Twitter
• Facebook
• Instagram
• Pinterest
• YouTube
• TikTok
• WhatsApp