Tribesigns Two-Person Desk Assembly Instructions
Model No.: HOGA-YS0183/YS0262, HOGA-YS0270/YS0320, HOGA-YS0321
Contact Information
Customer Support: support@tribesigns.com
Phone: 1-424-220-6888
Hours: Monday to Friday, 12:00 PM to 1:00 AM GMT
Website: www.tribesigns.uk, www.tribesigns.de, www.tribesigns.it, www.tribesigns.fr, www.tribesigns.es
Warm Tips
- Carefully read and keep these instructions for later.
- Before assembling, ensure all parts and accessories are present.
- Assemble on a soft, smooth surface like a carpet to avoid scratches.
- Do not fully tighten the screws until everything is correctly in place.
Assembly Video
Scan the QR code to watch the installation video or search for the model number on YouTube.
Note: If you cannot find the assembly video, please contact customer support.
Tools and Precautions
Recommended Tools: Hand tools are recommended for assembly. If an electric screwdriver is used, reduce its power to protect the product.
Surface Protection: To avoid scratching, assemble the furniture on a soft surface, such as a rug.
Parts List
| Part | Description | Quantity |
|---|---|---|
| 1 | Tabletop Panel | 2 pcs |
| 2 | Side Panel | 2 pcs |
| 3 | Long Support Bar | 2 pcs |
| 4 | Short Support Bar | 2 pcs |
| 5 | Connecting Bar | 1 pc |
| 6 | Crossbar | 2 pcs |
Hardware List
| Hardware | Description | Quantity |
|---|---|---|
| A | M8 Bolt | 4 pcs |
| B | M6x12mm Screw | 8 pcs |
| C | M6x60mm Screw | 8 pcs |
| D | M6x25mm Screw | 8 pcs |
| E | M6x50mm Screw | 8 pcs |
| F | M6x40mm Screw | 12 pcs |
| G | Ø8x30mm Dowel | 3 pcs |
| H | M6 Nut | 4 pcs |
| I | Wrench | 1 pc |
Assembly Steps
- Attach side panels (2) to the tabletop panels (1) using hardware A. Tighten screws to 70%.
- Connect the short support bars (4) to the side panels (2) using hardware B.
- Attach the long support bars (3) to the side panels (2) using hardware C and H. Tighten screws to 70%.
- Insert the connecting bar (5) between the tabletop panels (1) and secure with hardware D.
- Join the tabletop panels (1) using dowels (G).
- Attach the crossbars (6) to the side panels (2) using hardware E. Tighten screws to 70%.
- Secure the entire structure using hardware F. Tighten screws to 70%.
- Once all parts are correctly in place, tighten all screws to 100%.
Final Check
Ensure all screws are tightened securely. Do not press hard on the table edge.
Customer Service
For any issues with missing or damaged parts, please keep the original packaging, take photos of the packaging and the product, and contact customer support promptly.
EC REP: CET PRODUCT SERVICE SP. Z O.O., UI. Dluga 33 102, 95-100 Zgierz Łódzkie Poland
Email: info@cetproduct.com
Follow Tribesigns
Connect with us on social media:
- YouTube
- TikTok
