Tribesigns Assembly Instructions

Computer Table

Model No.: HOGA-RY0060X/HOGA-RY0146, HOGA-RY0191/HOGA-RY0227, HOGA-RY0268

This document provides assembly instructions for the Tribesigns Computer Table. Please read carefully and keep for future reference.

The assembly can be done in two configurations, as shown in the diagrams.

Contact Us

We're here to help you.

Email: support@tribesigns.com

Phone: 1-424-220-6888 (Contact us from 7 AM to 8 PM EST, Monday to Friday)

Your satisfaction is our top priority. If you encounter any issues with this product, such as missing or damaged parts, please retain the original packaging and take photos of the packaging and the product, then contact us as soon as possible.

Warm Tips

1. Carefully read these instructions and keep them for future reference.
2. Check the parts list and confirm everything's there before starting assembly.
3. When assembling, put all parts on a soft, smooth surface like a carpet to avoid scratches.
4. Don't fully tighten screws until all parts are confirmed in place to avoid misalignment.

How to Get the Assembly Video

Step 1: Scan the QR code for the Installation Video.

Step 2: Alternatively, search with the Model No. (e.g., HOGA-RY0060X) on the bottom left corner of the title page.

Note: If you can't find the assembly video, please contact us.

Assembly Recommendations

We recommend using hand tools for assembly. If an electric screwdriver is used, reduce power and torque to avoid damage to the product.

AVOID SCRATCHES: In order to avoid scratching, this furniture should be assembled on a soft surface, such as a rug.

Parts List

Hardware List

Assembly Steps

Step 1: Attach part A (X16) to parts 1, 2, and 3. Attach part 15 and 16 to part 1.

Step 2: Assemble the drawer components. Attach parts F (X20), M (X5), and N (X5) to the drawer sides (4) and bottoms (7).

Step 3: Assemble the drawer sides (14) with parts B (X4) and D (X2). Attach part 16 to part 15 using parts B (X4) and D (X2).

Step 4: Attach part 2 to the assembled drawer structure using parts B (X8) and D (X4).

Step 5: Assemble the leg structure. Attach parts E (X1), H (X4), and L (X2) to parts 17, 18, and 20.

Step 6: Connect the drawer units to the leg structure using parts H (X2), I (X4), and J (X2).

Step 7: Attach part 3 to the drawer units using parts A (X8), C (X8), and G (X8).

Step 8: Attach part 1 to the main structure using parts B (X4), D (X4), and J (X4).

Step 9: Secure the top panel. Attach parts F (X4) and K (X4) to the underside of the top panel.

Step 10: Assemble the drawer slide rails. Attach parts A (X12), C (X12), and G (X12) to the drawer slide rails (9, 10, 11, 12).

Step 11: Attach the drawer slide rails to the drawer units using parts A (X12), C (X12), and G (X12).

Step 12: Assemble the drawer boxes. Attach parts F (X20), O (X5), and P (X5) to the drawer components.

Step 13: Attach the drawer boxes to the main structure. Use part Q (X1) for securing.

Step 14: Final assembly. The drawer unit can be attached to either the left or right side of the table.

Follow Tribesigns

Connect with us on social media:

• Facebook
• Instagram
• Pinterest
• Twitter
• YouTube
• TikTok
• WhatsApp