BW-305 Brush Weatherstrips
Item/Finish: BW-305
Length: 36" & 48"
Brush Material: Nylon Brush
Retainer Finish: Mill Finish Aluminum & Duro Finish
Product Dimensions
Diagram illustrating the cross-section of the Cal-Royal BW-305 Brush Weatherstrip. It shows a metal retainer profile designed to attach to the bottom of a door. A nylon brush sweep extends downwards from the retainer. Key dimensions are marked: the brush height is 1/4 inch (6.4 mm), the retainer height is 7/8 inch (22.2 mm), and the overall depth is 1 inch (25.4 mm). The diagram labels the brush material as 'Nylon'.
Installation Guidelines
Cutting Brush
- Detach brush prior to trimming.
- Cut off extra brush using a cutting tool (lineman side cutting pliers) and crimp the brush strand ends.
- Re-install the brush until it is level with one end of the retainer and crimp to hold it in place.
Door Bottom Retainer
- Determine the required length, mark and cut the door bottom sweep to full width of the door.
- When trimming, remove parts of the brush seal to be trimmed and use a cutting tool (lineman side cutting pliers) to compress the end of seal. This will retain the brush. Trim the aluminum retainer with a hacksaw.
- Close the door and place door bottom sweep along outside bottom edge of door so that it makes contact with threshold. Mark door in center of slotted holes.
- Drill pilot holes in door at marks.
- Fasten door bottom sweep to door with screws.
- Adjust to ensure firm contact with threshold / above finish floor.
Tools Required
- Power tool drill
- Marker
- Caulking gun
- Measuring tape
- Screw driver
- Cutting tools (hacksaw & plier)
Testing/Ratings
Certifications and Ratings
Certifications and ratings displayed include: a flame symbol with '10C', a 'UL CLASSIFIED' mark (File R26381), a 'US' mark, a symbol representing sound transmission, a symbol representing air leakage, and a 'BHMA CERTIFIED' logo.
Gasketing material for fire doors intended for application to UL listed steel frames and/or classified steel covered composite type, and hollow metal type fire doors rated up to 3hrs; wood and plastic covered composite type fire doors rated up to 1-1/2 hrs; and wood core type fire doors rated up to 20 minutes. 43ZY
Fastener
Screws Size - #6 x 5/8" PPHSMS
Packaging Includes
- Screws for wood and metal doors
Important Reminder
Always use appropriate Personal Protective Equipment (PPE) during installation.
Contact Information
Company: CAL-ROYAL PRODUCTS, INC. U. S. A.
Address: 6605 Flotilla Street, City of Commerce, CA 90040 U.S.A.
Website: www.cal-royal.com
Email: sales@cal-royal.com
Phone: (323) 888-6601 ; (800) 876-9258
Fax: (323) 888-6699 ; (800) 222-3316
Document Number: DWG # TWG5013. - 1/1 - MAR2022
Royal | Over 120 years bringing the highest quality consumer products
Cal-Royal Products, Inc. - Home
