Royal | Over 120 years bringing the highest quality consumer products
Cal-Royal Products, Inc. - Home
Instruction Manual for CAL-ROYAL models including: BTN-112, Door Bottom Sweep, BTN-112 Door Bottom Sweep, Bottom Sweep, Sweep
Cal-Royal Products, Inc. - Templates and Installation Instructions
Cal-Royal Products, Inc. - Thresholds & Weatherstrips
File Info : application/pdf, 1 Pages, 1.33MB
DocumentDocumentWeather Seal Door Accessories BTN-112 Door Bottom Sweep BTN-112 Door Bottom Sweep ITEM/FINISH: BTN-112 LENGTH: 36" & 48" VINYL INSERT MILL FINISH ALUMINUM & DURO FINISH Installation Guidelines: 1. Determine the required length, mark and cut the the door bottom sweep to full width of the door. 2. Close the door and place door bottom sweep along outside bottom edge of door so that it makes contact with threshold. Mark door in center of slotted holes. 4. Drill pilot holes in door at marks. 5. Fasten door bottom sweep to door with screws. 6. Adjust to ensure firm contact with threshold / above finish floor. Tools Required: - Power tool drill - Measuring tape - Marker - Screw driver - Caulking gun - Cutting tools (hacksaw & plier) TESTING/RATINGS: Gasketing material for fire doors intended for application to UL listed steel frames and/or classified steel covered composite type, and hollow metal type fire doors rated up to 3hrs; wood and plastic covered composite type fire doors rated up to 1-1/2 hrs; and wood core type fire doors rated up to 20 minutes. 43ZY Fastener : Screws Size - #6 x 5/8" PPHSMS Packaging includes: - Screws for wood and metal doors HINT: "Where to install door sweep?" Door sweeps are installed on one side of a door to keep out cold drafts. It should be installed on the inside bottom edge of doors that swing into the house, and on the outside bottom edge of doors that swing outwards. Important Reminder: Always use appropriate Personal Protective Equipment (PPE) during installation. 6605 Flotilla Street, City of Commerce, CA 90040 U.S.A. Website: www.cal-royal.com | Email: sales@cal-royal.com Phone: (323) 888-6601 ; (800) 876-9258 | Fax: (323) 888-6699 ; (800) 222-3316 DWG # TWG5005 - 1/1 - MAR2022