7053-1BK Operations Manual

Product Overview and Placement

This document provides operations and installation instructions for the 7053-1BK outdoor wall light fixture by 4modernhome.

Helpful Tip:

1. This product is equipped with a dusk-to-dawn sensor. Please pay attention to the installation height to ensure that no objects such as eaves cover the sensor, as this may cause the light to remain on constantly.
2. After rotating the glass lampshade into position, kindly refrain from excessive force to prevent any accidental damage.

Features and Frequently Asked Questions

Dusk-to-Dawn Sensor: Absolutely, this sleek exterior light fixture boasts an intelligent dusk-to-dawn sensor that seamlessly transitions from off to on as nightfall approaches, automatically adjusting to ambient light levels below 20 LUX. In the morning, when brightness exceeds 90 LUX, it turns off, saving energy and eliminating the need for manual operation.

Lamp Not Turning On During Installation: If the lamp remains off during installation, it is most likely due to the dusk-to-dawn sensor's natural deactivation during daylight hours. To verify the lamp's functionality, simply cover the sensor with your hand or a cloth after turning on the power switch. If the lamp illuminates, this confirms that the lamp is working as intended and the issue is related to the sensor's automatic day/night cycle.

Disabling Dusk-to-Dawn Functionality: This fixture comes thoughtfully designed with a convenient rubber cap that allows you to easily disable the dusk-to-dawn feature. Simply slide the cap over the sensor whenever you prefer manual control over the lamp's operation.

Damaged Glass Lampshade: If you find that your glass lampshade is cracked, broken, or otherwise not in perfect condition, please contact customer service immediately. The customer service team is dedicated to providing the best possible solution and ensuring your satisfaction.

Assembly & Installation Instructions

Dear Customer: Thank you for choosing 4modernhome! We appreciate your business. Should you have any questions or encounter any issues, please don't hesitate to contact us. You can reach us via email at support@4modernhome.com or by calling 469-312-6428. Our team is dedicated to ensuring your complete satisfaction with your purchase. We value your feedback, as it helps future customers in making informed decisions. We encourage you to share your experience by leaving a brief product review on the platform where you made the purchase. Once again, thank you for choosing 4modernhome!

Best regards!

[4Modern home/Support Team]

CAUTION: Risk of fire

Please read all instructions carefully. Before you proceed to install, make sure that the power supply is turned off and remains off until installation is completed.

Warning: If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electric contractor.

Warning: California Residents Proposition 65 This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.

Caution: It is highly recommended to get an electrician to install this light. Please make sure to turn the electricity off at the main circuit breaker before beginning installation. All glass is fragile. Use care when handling glass component(s)and/or lamp(s).

7053-1BK installation steps:

1. Turn open the nut H from the lamp body and remove the hanging plate B.
2. Lock the hanging plate B on the junction box A with screw C.
3. Lock the decorative strip G on the lamp body with screw F.
4. Transfer the glass cover I knob to the lamp body.
5. Make the lamp body black, white and respectively with the terminal D The ground line and the input line are connected respectively.
6. Lock the lamp body on the hanging board B with the nut H; Installation completed.