Ecotap DC60 Electric Vehicle Charging Station
Specifications
General Characteristics
| Reference Number | 80060008 / 80080035 / 80080328 / 80080135 / 80082435 / 80080235 / 80082011 / 80082335 |
| Accessory | 331007 |
| Dimensions (H x W x D) | 1440 mm x 610 mm x 350 mm |
| Enclosure Material | Steel, 2.2 mm |
| Standard Color | Body: Ral 9016 / Cover: Ral 9016 |
| Steel Treatment | Anti-corrosion (KTL) and powder coating |
| Weight | 235 kg |
| Number of Charging Points | 1 for 80060008 / 80080035 / 80080328 / 80080135 2 for 80082435 / 80080235 / 80082011 / 80082335 |
| Cable | CCS2 |
Electrical Characteristics
| AC Input Voltage | 3 x 400VAC + N ± 10% |
| AC Input Current & Power (line side) | 90A @ 60 kW DC Output Power |
| AC Input Frequency | 50Hz |
| DC Output Power Range | 1 - 60 kW |
| DC Output Voltage Range | 200 - 1000 Vdc |
| DC Output Current Range | 1xCCS: 0 - 200A 2xCCS: 0 - 100A (2xCCS usage), 0 - 200A (1xCCS usage) |
| Stabilized DC Voltage Accuracy | <= 0.5% |
| Stabilized DC Current Accuracy | <= 1% |
| Efficiency | > 95% at full load |
| THDi (Total Harmonic Distortion) | < 5% (50% to 100% load) |
| Power Factor | > 0.99 (100% load); > 0.98 (50% to 100% load) |
| Network Type | TN-C, TN-S, TN-C-S or TT |
| Impulse Voltage (Uimp) | 4kV |
| Insulation Voltage (Ui) | 230V single-phase / 500V three-phase |
| Integrated Protection System | Fuse 125A gG + Each PSU MCB 63A Curve C & RCD 63A Type B |
| Conditional Short Circuit Current | 6000A IEC/EN 60898-1 / 10kA IEC/EN 60947-2 |
| Admissible Thermal Stress in case of Short Circuit | 16,000 A²s |
| Integrated Surge Protection | Not included |
| Standby Consumption | < 40W |
| Mains Connection | Phases, Ground, M8 terminals |
| Torque Setting | 22 - 36 N.m for M8 |
| Charge Type | Mode 4 charging terminal |
| Vehicle Connection | Mode 4 cable connector, 8m straight 200A CCS2. Use of extension and adapter prohibited. |
| AC Meter | Not included |
| DC Meter | 80060008 / 80080035 / 80082435 / 80080235: Not included 80080328 / 80080135 / 80082011 / 80082335: Included |
| Back Office Protocol | OCPP 1.6 Json |
| Positioning | GPS |
| Ethernet Connectivity | RJ45 Connector |
| Payment Terminal | May be included in all models. Available terminals: Payter Apollo Terminal, Worldline VALINA Terminal, PAX IM30 Terminal. |
Environment
| Operating Temperature | -25°C / +50°C |
| Storage Temperature | -25°C / +80°C |
| Relative Humidity | 0 to 90% non-condensing |
| Corrosivity Class | C4 according to IEC 9223 and IEC 12944 3C3/4C3 according to IEC 60721-3 |
| Protection Index | IP 54 (IEC 60529), IK 10 (EN 62262) Connected or not |
| Vandalism Resistance | IK 10 |
| Sound Level | < 72 dB at 1m at 20°C, at full load |
| Product Standards | IEC 61851-1, IEC TS 61439-7 (AEVCS), IEC 61851-23, IEC 62477-1, IEC 61439-1 |
| Standard DC Protocol (vehicle communication) | CCS2: IEC 61851-23 / DIN SPEC 70121 CHAdeMO: CHAdeMO 1.2 |
| Appliance Installation | Indoor or outdoor, limited access area, intended for use by ordinary persons (DBO), cabinet mounting (wall mounting), pollution degree 3, compatible grounding system TN-C, TN-S, TN-C-S or TT. For IT grounding systems, it may be locally modified by adding an isolation transformer. |
| Electrical Safety | Class 1 IEC 61140 |
| Conformity to Eichrecht | No |
Electromagnetic Compatibility
| European Standards | Low Voltage Directive 2014/35/EU / EMC Directive: 2014/30/EU |
| Radio Technology Type | GSM 2G/3G/4G, GPRS, RFID |
| Supported Charging Cards | Mifare, Ntag, and iCODE SLI cards |
