Product Overview
This document provides the technical specifications for the Ecotap DC30 electric vehicle charging station. The DC30 is designed for efficient and reliable EV charging.
The Ecotap DC30 is depicted in an image alongside a modern electric car, illustrating its application in EV charging infrastructure. The station is mounted on a stand, featuring the Ecotap branding and a charging cable.
For more information, visit www.ecotap.nl or contact info@ecotap.nl.
General Characteristics
| Reference Number | 80030042 / 80030050 / 80030047 / 80030055 / 80030008 / 80030009 / 80030010 / 80030013 |
| Accessories | 669992 / 669993 |
| Dimensions H x W x D (mm) | 710 mm x 480 mm x 225 mm |
| Enclosure Material | Steel 2.2 mm |
| Standard Color | Body: Ral 7011 / Cover: Ral 9016 |
| Steel Treatment | Anti-corrosion (KTL) and powder coating |
| Weight (kg) | 57 kg |
| Number of Charging Points | 1 |
| Cable | CCS2 |
Electrical Characteristics
| AC Input Voltage | 3 x 400VAC + N ± 10% |
| AC Input Current and Power (line side) | 45A to 30 kW DC Output Power |
| AC Input Frequency (fn) | 50Hz |
| DC Output Power Range | 1 - 30 kW |
| DC Output Voltage Range | 200 - 1000 Vdc |
| DC Output Current Range | 0 - 100A |
| DC Output Voltage Stability Accuracy | ≤ ±0.5% |
| DC Output Current Stability Accuracy | ≤ ±1% |
| Efficiency | > 95% at full load |
| THDi (Total Harmonic Distortion) | < 5% (load 50% to 100%) |
| Power Factor | > 0.99 (100% load) ; > 0.98 (50% to 100% load) |
| Network Type | TN-C, TN-S, TN-C-S or TT |
| Impulse Voltage (Uimp) | 4kV |
| Insulation Voltage (Ui) | 230V single-phase / 500V three-phase |
| Integrated Protection System | RCD 63A 30mA Type B |
| Conditional Short Circuit | Not included |
| Admissible Thermal Stress in Case of Short Circuit | 16,000 A²s |
| Integrated Surge Protection | Not included |
| Standby Consumption (W) | ≤ 30W |
| Network Connection | Phases/Neutral/Ground, rigid or flexible cable with ferrule, 16 to 50 mm², screw terminals H07 V R/U |
| Charging Type | Mode 4 charging terminal |
| Vehicle Connection Mode 4 attached cable connector | Use of extension cords and adapters is prohibited. 80030042 / 80030050 / 80030047 / 80030055: 3.5m straight 150A CCS2 80030008 / 80030009 / 80030010 / 80030013: 8m straight 150A CCS2 |
| AC Meter | Not included |
| DC Meter | 80030042 / 80030050 / 80030008 / 80030009: Not included 80030047 / 80030055 / 80030010 / 80030013: Included |
| Back Office Protocol | OCPP 1.6 Json |
| Positioning | GPS |
| Ethernet Connectivity | RJ45 Connector |
| Payment Terminal | Not included |
Environment
| Operating Temperature | -25°C / +50°C |
| Storage Temperature | -25°C / +80°C |
| Relative Humidity | 0 to 90% non-condensing |
| Protection Rating | IP 54 (IEC 60529), IK 10 (EN 62262) Connected or not |
| Vandalism Resistance | IK 10 |
| Sound Level | < 68 dB at 1m at 20° C, at full load |
| Product Standards | IEC 61851-1, IEC TS 61439-7 (AEVCS), IEC 61851-23, IEC 62477-1, IEC 61439-1 |
| Standard DC Protocol (vehicle communication) | CCS2: IEC 61851-23 / DIN SPEC 70121 CHAdeMO: CHAdeMO 1.2 |
| Appliance Installation | Indoor or outdoor, limited access area, intended for use by ordinary persons (DBO), cabinet mounting (wall mounting), pollution degree 3, grounding system compatible TN-C, TN-S, TN-C-S or TT. In case of IT grounding system, it may be modified locally by adding an isolation transformer. |
| Electrical Safety | Class 1 IEC 61140 |
| Eichrecht Compliance | No |
Electromagnetic Compatibility
| European Standards | Low Voltage Directive 2014 / 35EU / EMC Directive: 2014 / 30 / EU |
| Radio Technology Type | GSM 2G/3G/4G, GPRS, RFID |
| Adapted Charging Cards | Mifare, Ntag and iCODE SLI cards |
Contact Information
Ecotap B.V.
Kruisbroeksestraat 23
5281 RV Boxtel
+31(0) 411 210 210
info@ecotap.nl
