Ecotap DC60 Electric Vehicle Charging Station
This document provides detailed specifications for the Ecotap DC60 electric vehicle charging station.
General Characteristics
| Attribute | Specification |
|---|---|
| Reference Number | 80060008 / 80080035 / 80080328 / 80080135 / 80082435 / 80080235 / 80082011 / 80082335 |
| Accessory | 331007 |
| Dimensions (H x W x D) (mm) | 1440 mm x 610 mm x 350 mm |
| Enclosure Material | Steel 2.2 mm |
| Standard Color | Enclosure: RAL 9016 / Cover: RAL 9016 |
| Surface Treatment | Anti-corrosion (KTL) and powder coating |
| Weight (kg) | 235 kg |
| Number of Charging Points | 1 for 80060008 / 80080035 / 80080328 / 80080135; 2 for 80082435 / 80080235 / 80082011 / 80082335 |
| Cable | CCS2 |
Electrical Characteristics
| Attribute | Specification |
|---|---|
| AC Input Voltage | 3 x 400VAC ± 10% |
| AC Input Current and Power (Mains Side) | 90A at 60 kW DC output power |
| AC Input Frequency (fn) | 50Hz |
| DC Output Power Range | 1 - 60 kW |
| DC Output Voltage Range | 200 - 1000 Vdc |
| DC Output Current Range | 1xCCS: 0 - 200A; 2xCCS: 0 - 100A (2xCCS usage), 0 - 200A (1xCCS usage) |
| Accuracy of Stabilized DC Output Voltage | ≤ ±0.5% |
| Accuracy of Stabilized DC Output Current | ≤ ±1% |
| Efficiency | > 95% @Full Load |
| THDi (Total Harmonic Distortion) | < 5% (50% to 100% load) |
| Power Factor | > 0.99 (100% load); > 0.98 (50% to 100% load) |
| Grid Type | TN-C, TN-S, TN-C-S, or TT |
| Surge Voltage (Uimp) | 4kV |
| Insulation Voltage (Ui) | 230V single-phase; 500V three-phase |
| Integrated Protection System | Sicherung 125A gG + Each PSU MCB 63A Curve C & RCD 63A Type B |
| Conditional Short-Circuit Current | 6000A IEC/EN 60898-1; 10kA IEC/EN 60947-2 |
| Admissible Thermal Load during Short Circuit | 16 000 A²s |
| Integrated Surge Protection | Not included |
| Standby Consumption (W) | < 40W |
| Connection to the Power Grid | Phase, Earth, Cable lug terminals M8 |
| Tightening Torque | 22 - 36 N.m for M8 |
| Load Type | Mode 4 charging connector |
| Vehicle Connection Mode 4 Attachment Cable Connector | Use of extension and adapter prohibited. 8m straight 200A CCS2 |
| AC Meter | Not included |
| DC Meter | 80060008 / 80080035 / 80082435 / 80080235: Not included; 80080328 / 80080135 / 80082011 / 80082335: Included |
| Backoffice Protocol | OCPP 1.6 Json |
| Location | GPS |
| Ethernet Connectivity | RJ45 connector |
| Payment Terminal | Can be integrated into all models. List of available payment terminals: Payter Apollo Terminal, Worldline VALINA Terminal, PAX IM30 Terminal |
Environment
| Attribute | Specification |
|---|---|
| Operating Temperature | -25°C / +50°C |
| Storage Temperature | -25°C / +80°C |
| Relative Humidity | 0 to 90% without condensation |
| Corrosivity Class | C4 according to IEC 9223 and IEC 12944; 3C3/4C3 according to IEC 60721-3 |
| Protection Rating | IP 54 (IEC 60529), IK 10 (EN 62262) Plugged in or not plugged in |
| Resistance to Vandalism | IK 10 |
| Noise Level | < 72 dB at 1m at 20° C, at full load |
| Product Standards | IEC 61851-1, IEC TS 61439-7 (AEVCS), IEC 61851-23, IEC 62477-1, IEC 61439-1 |
| DC Standard Protocol (Communication with Vehicle) | CCS2: IEC 61851-23 / DIN SPEC 70121; CHAdeMO: CHAdeMO 1.2 |
| Installation | Indoor or outdoor area, zone with limited access, intended for use by normal persons (DBO), installation in a cabinet (wall mounting), pollution degree 3, TN-C, TN-S, TN-C-S or TT compatible earthing system, which can be modified in case of an on-site IT earthing system by adding an isolation transformer. |
| Electrical Safety | Class 1 IEC 61140 |
| Metrology Compliance | No |
Electromagnetic Compatibility
| Attribute | Specification |
|---|---|
| European Standards | Low Voltage Directive 2014 / 35EU / EMC Directive: 2014 / 30 / EU |
| Type of Radio Technology | GSM 2G/3G/4G, GPRS, RFID |
| Suitable Charging Cards | Mifare, Ntag and iCODE SLI cards |
Contact Information
Ecotap B.V.
Kruisbroeksestraat 23
5281 RV Boxtel
+31(0) 411 210 210
info@ecotap.nl
