Ecotap DC60 EV Charger
The Ecotap DC60 is a high-performance DC fast charger designed for electric vehicles. This document outlines its technical specifications.
General Characteristics
| Reference number | 80060008 / 80080035 / 80080328 / 80080135 / 80082435 / 80080235 / 80082011 / 80082335 |
| Accessory | 331007 |
| Dimension H x W x D (mm) | 1440 mm x 610 mm x 350 mm |
| Casing material | Steel 2.2 mm |
| Standard colour | Body: Ral 9016 / Cover: Ral 9016 |
| Steel treatment | Anti-corrosion (KTL) and powder coating |
| Weight (kg) | 235 kg |
| Number of charging points | 1 for 80060008 / 80080035 / 80080328 / 80080135 2 for 80082435 / 80080235 / 80082011 / 80082335 |
| Cable | CCS2 |
Electrical Characteristics
| AC input voltage | 3 x 400VAC + N ± 10% |
| AC input current and power (line-side) | 90A at 60 kW DC output power |
| AC input Frequency (fn) | 50Hz |
| DC output power range | 1-60 kW |
| DC output voltage range | 200 - 1000 Vdc |
| DC output current range | 1xCCS: 0 - 200A 2xCCS: 0 - 100A (2xCCS use), 0 - 200A (1xCCS use) |
| DC output voltage stabilized accuracy | ≤ ±0.5% |
| DC output current stabilized accuracy | ≤ ±1% |
| Efficiency | > 95% @full charge |
| THDi (Total harmonic distortion) | < 5% (load 50% to 100%) |
| Power factor | > 0.99 (load 100%); > 0.98 (load 50% to 100%) |
| Mains type | TN-C, TN-S, TN-C-S or TT |
| Impulse voltage (Uimp) | 4kV |
| Insulation voltage (Ui) | 230V single-phase 500V three-phase |
| Integrated protection system | Fuse 125A gG + Each PSU MCB 63A Curve C & RCD 63A Type B |
| Conditional short-circuit | 6000A IEC/EN 60898-1 10kA IEC/EN 60947-2 |
| Allowable thermal stress in Short Circuit | 16 000 A's |
| Integrated surge protection | Not included |
| Standby consumption (W) | ≤ 40W |
| Connection to the mains | Phases/Earth, Lug terminals M8 |
| Tightening Torque | 22-36 N.m for M8 |
| Type of load | Mode 4 charging terminal |
| Vehicle connection | Mode 4 attache cable connector Use of extension and adapter prohibited. 8m straight 200A CCS2 |
| AC meter | Not included |
| DC meter | 80060008 / 80080035 / 80082435 / 80080235: Not included 80080328 / 80080135 / 80082011 / 80082335: Included |
| Back office protocol | OCPP 1.6 Json |
| Positioning | GPS |
| Connectivity Ethernet | RJ45 connector |
| Payment terminal | Can be included in all models, list of payment terminals available: - Payter Apollo Terminal - Worldline VALINA Terminal - PAX IM30 Terminal |
Environment
| Operating temperature | -25°C / +50°C |
| Storage temperature | -25°C / +80°C |
| Relative humidity | 0 to 90% without condensation |
| Corrosivity class | C4 according to the IEC 9223 and IEC 12944 3C3/4C3 according to the IEC 60721-3 |
| Protection rating | IP 54 (IEC 60529), IK 10 (EN 62262) Plugged in or not |
| Vandalism resistance | IK 10 |
| Noise level | < 72 dB at 1m at 20° C, at full charging |
| Product | IEC 61851-1, IEC TS 61439-7 (AEVCS), IEC 61851-23, IEC 62477-1, IEC 61439-1 |
| DC standard protocol (communications with the vehicle) | CCS2: IEC 61851-23 / DIN SPEC 70121 CHAdeMO: CHAdeMO 1.2 |
| Installation | Interior or exterior, limited access zone, intended for use by ordinary persons (DBO), assembly in cabinet (wall mounted), Pollution Degree 3, TN-C, TN-S, TN-C-S or TT compatible earthing system. In the event of an IT earthing system, this can be changed locally by adding an isolating transformer. |
| Electrical safety | Class 1 IEC 61140 |
| Eichrecht conform | No |
Electromagnetic Compatibility
| European standards | Low Voltage Directive 2014 / 35EU / EMC Directive 2014 / 30 / EU |
| Radio technology type | GSM 2G/3G/4G, GPRS, RFID |
| Suitable charging cards | Mifare, Ntag and iCODE SLI cards |
