Ecotap DC120 Electric Vehicle Charging Station
A brand of Legrand
Product Overview
The Ecotap DC120 is a high-performance electric vehicle charging station designed for efficient and reliable charging. It features a robust build and advanced technical specifications to meet the demands of modern EV infrastructure.
The charging station is depicted in an image featuring a white electric car parked next to a tall, white charging unit. The unit has a black charging cable and connector, and a control panel with buttons and indicators.
Specifications
General Characteristics
| Reference number | 80120102 / 80120108 |
|---|---|
| Dimension H x W x D (mm) | 1736 mm x 825 mm x 419 mm |
| Casing material | Steel 2.2 mm |
| Standard colour | Body: Ral 9016 / Cover: Ral 9016 |
| Steel treatment | Anti-corrosion (KTL) and powder coating |
| Weight (kg) | 285 kg |
| Number of charging points | 1 |
| Cable | CCS2 |
Electrical Characteristics
| AC input voltage | 3 x 400VAC ± 10% |
|---|---|
| AC input current and power (line-side) | 180A at 120 kW DC output power |
| AC input Frequency (fn) | 50Hz |
| DC output power range | 1 - 120 kW |
| DC output voltage range | 200 - 1000 Vdc |
| DC output current range | 0 - 320A |
| DC output voltage stabilized accuracy | ≤ ±0.5% |
| DC output current stabilized accuracy | ≤ ±1% |
| Efficiency | > 95% @full charge |
| THDi (Total harmonic distortion) | < 5% (load 50% to 100%) |
| Power factor | > 0.99 (load 100%); > 0.98 (load 50% to 100%) |
| Mains type | TN-C, TN-S, TN-C-S or TT |
| Impulse voltage (Uimp) | 4kV |
| Insulation voltage (Ui) | 230V single-phase / 500V three-phase |
| Integrated protection system | Fuse 250A gG + Each PSU MCB 80A Curve C & RCD 63A Type B |
| Conditional short-circuit | 6000A IEC/EN 60898-1 / 10kA IEC/EN 60947-2 |
| Allowable thermal stress in Short Circuit | 16 000 A²s |
| Integrated surge protection | Included |
| Standby consumption (W) | < 62W |
| Connection to the mains | Phases, Lug terminals M10 / Earth, Lug terminals M8 |
| Tightening Torque | 30 - 44 N.m for M10 / 22 - 36 N.m for M8 |
| Type of load | Mode 4 charging terminal |
| Vehicle connection Mode 4 attache cable connector | Use of extension and adapter prohibited. 80120102: 4m straight 250A CCS2 80120108: 8m straight 250A CCS2 |
| AC meter | Not included |
| DC meter | Not included |
| Back office protocol | OCPP 1.6 Json |
| Positioning | GPS |
| Connectivity Ethernet | RJ45 connector |
Environment
| Operating temperature | -25°C / +50°C |
|---|---|
| Storage temperature | -25°C / +80°C |
| Relative humidity | 0 to 90% without condensation |
| Corrosivity class | C4 according to the IEC 9223 and IEC 12944 / 3C3/4C3 according to the IEC 60721-3 |
| Protection rating | IP 54 (IEC 60529), IK 10 (EN 62262) Plugged in or not |
| Vandalism resistance | IK 10 |
| Noise level | < 72 dB at 1m at 20° C, at full charging |
| Product | IEC 61851-1, IEC TS 61439-7 (AEVCS), IEC 61851-23, IEC 62477-1, IEC 61439-1 |
| DC standard protocol (communications with the vehicle) | CCS2: IEC 61851-23 / DIN SPEC 70121 |
| Installation | Interior or exterior, limited access zone, intended for use by ordinary persons (DBO), assembly in cabinet (wall mounted), Pollution Degree 3, TN-C, TN-S, TN-C-S or TT compatible earthing system. In the event of an IT earthing system, this can be changed locally by adding an isolating transformer. |
| Electrical safety | Class 1 IEC 61140 |
| Eichrecht conform | No |
Electromagnetic Compatibility
| European standards | Low Voltage Directive 2014 / 35EU / EMC Directive: 2014 / 30 / EU |
|---|---|
| Radio technology type | GSM 2G/3G/4G, GPRS, RFID |
| Suitable charging cards | Mifare, Ntag and iCODE SLI cards |
Contact Information
Ecotap B.V.
Kruisbroeksestraat 23
5281 RV Boxtel
+31(0) 411 210 210
info@ecotap.nl
Website: www.ecotap.nl
