OMRON JPN610T Automatic Blood Pressure Monitor

1 Package Contents

The package typically includes an Instruction Manual and the Automatic Blood Pressure Monitor (Model JPN610T).

2 Preparing for a Measurement

For accurate readings, follow these preparation steps:

• 30 minutes before: Avoid eating, drinking alcohol, smoking, bathing, and exercising.
• 5 minutes before: Relax and rest. Sit comfortably.

3 Downloading the "OMRON connect" App

To sync your readings with your smart device, download the "OMRON connect" app from your device's app store.

[App Icon/Logo Placeholder] OMRON connect

4 Installing Batteries

Insert 4 AA, 1.5V batteries into the battery compartment. Ensure correct polarity.

[Battery Diagram Placeholder: Shows inserting 4 AA batteries]

5 Pairing Your Smart Device

Follow the on-screen instructions in the "OMRON connect" app to pair your monitor via Bluetooth.

[Bluetooth Pairing Diagram Placeholder: Shows Bluetooth icon, ON status, and phone connection]

Note: The date and time will automatically be set when your monitor is paired with the app.

6 Setting Date and Time Manually

If your monitor is not paired with a smart device, or if you need to set the date and time manually:

Set year > month > day > hour > minute using the Back/Forward buttons.

[Date/Time Setting Diagram Placeholder: Shows Year, Month, Day, Hour, Minute fields and Back/Forward buttons]

7 Applying the Cuff on the Left Arm

Follow these steps to correctly apply the cuff:

1. Ensure the tube side of the cuff is 1-2 cm above the inside elbow.
2. Make sure the air tube is on the inside of your arm.
3. Wrap the cuff securely so it cannot slip around. It should be snug but not too tight.

[Cuff Application Diagram Placeholder: Shows cuff placement on the arm, distance from elbow, and securing the cuff]

Note: If taking measurements on the right arm, refer to Instruction Manual 2.3.

8 Sitting Correctly

Proper posture is crucial for accurate readings:

1. Sit comfortably with your back and arm supported.
2. Place the arm cuff at the same level as your heart.
3. Keep feet flat on the floor, legs uncrossed, remain still, and do not talk during the measurement.

[Sitting Posture Diagram Placeholder: Shows correct sitting posture with arm supported and at heart level]

9 Taking a Measurement

To take a blood pressure measurement:

1. Apply the cuff correctly and sit in the correct posture.
2. Press the [START/STOP] button. The cuff will inflate, and the measurement will be taken automatically.
3. The reading is saved automatically. Open the "OMRON connect" app to transfer the reading.

Special Instructions:

• If systolic pressure is > 210 mmHg: After the cuff starts inflating, press and hold the [START/STOP] button until the monitor inflates 30-40 mmHg higher than your expected systolic pressure.
• Guest Mode: Use this mode for a single measurement for another user. No readings are stored in memory. To activate, press and hold the [START/STOP] button for 3 seconds+ before measurement.

[Measurement Process Diagram Placeholder: Shows pressing START/STOP, cuff inflation, and reading display]

10 Checking Readings

The monitor may display symbols indicating certain conditions:

• High Blood Pressure Indicator: Appears if "SYS" is 135 mmHg or above and/or "DIA" is 85 mmHg* or above. (*Based on 2018 ESH/ESC Guidelines).
• Irregular Rhythm Indicator: Appears when an irregular heart rhythm** is detected. If it appears repeatedly, OMRON recommends consulting your physician. (**Defined as a rhythm that is 25% less or 25% more than the average rhythm).
• Body Movement Indicator: Appears when your body moves during a measurement. Remove the cuff, wait 2-3 minutes, and try again.
• Cuff Tightness Indicator: Appears if the cuff is not tight enough. Apply cuff again MORE TIGHTLY.

Error messages or other problems? Refer to Instruction Manual 3.

11 Using Memory Functions

The monitor can store readings and calculate averages.

• 11.1 Readings Stored in Memory: Up to 100 readings are stored.
• 11.2 Average of Latest Readings: Calculates the average of the latest 2 or 3 readings taken within a 10-minute span. (Requires 3 seconds+ press).
• 11.3 Deleting All Readings: To delete all stored readings, press and hold the [START/STOP] button for 4 seconds+ during the memory access mode.

[Memory Function Diagram Placeholder: Shows accessing memory, averaging options, and deletion process]

12 Other Settings

Customize monitor settings:

• 12.1 Disabling/Enabling Bluetooth®: Bluetooth is enabled by default. To disable/enable, press and hold the button for 10 seconds+.
• 12.2 Restoring to Default Settings: To restore factory defaults, press and hold the button for 4 seconds+ in the settings menu.

[Settings Diagram Placeholder: Shows Bluetooth toggle and restore default options]

13 Optional Medical Accessories

Compatible accessories include:

• Intelli Wrap™ Cuff (Fit Cuff) - HEM-FL31 (Size B: 22 - 42 cm)

Note: Do not discard the air plug; it can be used with optional cuffs.

For more information, visit: https://www.omronhealthcare-ap.com/

14 Other Optional Parts

Additional optional parts may be available:

• HHP-AM01 (for Taiwan)
• HHP-KSM01 (for Korea)