4Modernhome T258 Table Lamp Instruction Manual
Brand: 4MODERNHOME
Customer Support
Thank you for choosing 4Modernhome. For any questions or issues, please contact us via email at support@4modernhome.com or by calling 469-312-6428. Your feedback is valued to help future customers.
Important Safety Information
CAUTION: Risk of fire
Please read all instructions carefully before installation. Ensure the power supply is turned off and remains off until installation is completed.
California Proposition 65 Warning: This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Installation Recommendation: It is highly recommended to have an electrician install this light. Ensure electricity is turned off at the main circuit breaker before beginning installation.
Handling Caution: All glass components are fragile. Use care when handling glass components and/or lamps.
If any special control devices are used with this fixture, follow instructions carefully to assure full compliance with N.E.C. requirements. If you have questions, contact a qualified electrical contractor.
Product Details
Model: T258
Applicable bulb type: A19, A60, T45, ST58 (Bulb not included)
Origin: MADE IN CHINA
Parts Included
Diagram showing a table lamp assembly with labeled parts: A (Body), B (Lamp socket), C (Saddle), D (Harp), E (Shade), F (Finial). The diagram also indicates 'LN' for Line and Neutral terminals.
| Code | Part Description | QTY |
|---|---|---|
| A | Body | 1 |
| B | Lamp socket | 1 |
| C | Saddle | 1 |
| D | Harp | 1 |
| E | Shade | 1 |
| F | Finial | 1 |
Assembly Instructions
- Unpack all parts from cartons carefully.
- Carefully pull-out excess power cord from the lamp base while assembling to prevent the cord from becoming twisted.
- Tighten the lamp socket (B) into the body (A) until tight.
- Place the harp (D) onto the saddle (C).
- Place the shade (E) onto the harp (D).
- Tighten the finial (F) into the harp (D) until tight.
