Assembly & Installation Instructions
Dear Customer:
Thank you for choosing us! We truly appreciate your business and your trust. If you have any questions or encounter any issues, please don't hesitate to reach out. You can contact us by email at support@4modernhome.com or by phone at 469-312-6428. Our team is committed to ensuring your complete satisfaction. We also value your feedback, as it helps other customers make informed decisions. If you're happy with your purchase, we'd be grateful if you could take a moment to leave a brief product review on the platform where you made your purchase. Once again, thank you for choosing us. We look forward to serving you again!
Best regards,
The Support Team
Product Information
Applicable bulb type: A19, A60, T45, ST58... (Excluding bulb)
Safety Warnings
CAUTION: Risk of fire ?
Please read all instructions carefully. Before you proceed to install, make sure that the power supply is turned off and remains off until installation is completed.
Warning: California Residents Proposition 65
This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Caution: It is highly recommended to get an electrician to install this light. Please make sure to turn the electricity off at the main circuit breaker before beginning installation. All glass is fragile. Use care when handling glass component(s) and/or lamp(s).
General Warning: If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electric contractor.
Parts Included
| Code | Part Description | QTY |
|---|---|---|
| A | Body | 1 |
| B | Lamp socket | 1 |
| C | Saddle | 1 |
| D | Harp | 1 |
| E | Shade | 1 |
| F | Finial | 1 |
Assembly Steps
- Unpack all parts from cartons carefully.
- During assembly, the power cord should be prevented from twisting.
- Stuff cord into the lamp socket (B), then tighten the lamp socket (B) into the body (A) until tight.
- Place the harp (D) onto the saddle (C).
- Place the shade (E) onto the harp (D).
- Tighten the finial (F) into the harp (D) until tight.
Diagram Description
The product is a table lamp. The diagram shows the lamp's components labeled with letters A through F:
- A: The lamp base and main body.
- B: The lamp socket where the light bulb is inserted.
- C: A saddle piece that connects the harp to the socket.
- D: The harp, a curved metal piece that supports the lampshade.
- E: The lampshade, which diffuses the light.
- F: The finial, a decorative knob that secures the lampshade to the harp.
The diagram also indicates the power cord and its connection points. A warning symbol for "Risk of fire" is shown next to a simplified diagram of the power plug and wiring (L and N terminals).
The lamp is manufactured in China.
